Parameters - Mitsubishi Electric FR-V5NE-E Instruction Manual

Vector inverter
Table of Contents

Advertisement

4.1.1 Parameters

(1) Pr. 434 to Pr. 437 (IP address)
Set the IP address of the FR-V5NE. (Set the IP address that was assigned by the sub-network manager.)
http://* * *. * * *. * * *. * * * /
(2) Pr. 438 to Pr. 441 (sub-network mask)
Set these parameters when there is an address block (sub-network) where the IP address of the FR-V5NE belongs.
* * *. * * *. * * *. * * *
(3) Pr. 442 to Pr. 445 (gateway address)
Set the address when the network of a different host is used.
* *. * * *. * * *. * * *
(4)Pr. 446 "password"
Set the password in four digits. Use it when logging in to the inverter.
IP address 4 (Pr. 437)
IP address 3 (Pr. 436)
IP address 2 (Pr. 435)
IP address 1 (Pr. 434)
Sub-network mask 4 (Pr.441)
Sub-network mask 3 (Pr.440)
Sub-network mask 2 (Pr.439)
Sub-network mask 1 (Pr.438)
Gateway address 4 (Pr.445)
Gateway address 3 (Pr.444)
Gateway address 2 (Pr.443)
Gateway address 1 (Pr.442)
10
INVERTER SETTING

Advertisement

Table of Contents
loading

Table of Contents