2. Disassembly
2-8.Removing SUB PWB ASSY.
Remove in the order indicated by circled numbers.
<Step 1>
2-9.Removing MAIN PWB ASSY.
Remove in the order indicated by circled numbers.
<Step 1>
2
CN202
IC353
F351
IC356
14
1
3
1
CN101
IC202
SHEET STROBE
IC206
IC204
IC208
FinePix F601 Zoom (U/E/EG) SERVICE MANUAL
(1) Remove the connector of MIC ASSY(FZ04380-100).
(2) Remove "Board to board" connector (CN152) of
SUB PWB ASSY(CB0840-A100) in the direction
of the arrow, and remove SUB PWB ASSY.
2
(1) Remove one screws(BB11640-100).
(2) Remove the lock of connector (CN551), and
remove FPC of LCD.
(3) Remove MAIN PWB ASSY in the
direction of the arrow.
MAIN PWB ASSY
[ Notes of assembly of
1.Stop the harness of MIC ASSY by drawing around
SHEET STROBE(BB14127-100) as shown in a left chart.
2. Be note not to pinch the harness when you combine
MAIN PWB ASSY with DCST PWB UNIT and,
note the installation position to MAIN FRAME.
. ]