FujiFilm FinePix F601 Zoom Service Manual page 46

5. Inspection
<Step 2>
Item Mode
Power switch Auto pho-
check tography
Input switch LCD ON
check
Backup check
MENU
Menu/OK
<Step 3>
Item Mode
Check movie Auto pho-
mode, shock tography
noise. LCD ON
<Step 4>
Item Mode
Check normal Auto pho-
photography. tography
LCD ON
<Step 5>
Item Mode
Check movie Movie
and audio photogra-
recording. phy
LCD ON
46
Preparations for adjustment
and measurement
(1) Insert battery jig into
battery terminal.
(2) Set power supply volt-
age.
(3) Set mode dial to Auto
Photography mode.
(4) Set mode switch to Re-
play mode.
(5) Switch camera power
ON.
(7) Set mode switch to Pho-
tography mode.
(8) Press MENU/OK button.
(9) Run 8-direction button
through one cycle.
(10) Select SET, and change
to the desired setting.
(11) Set mode dial to Manual
Photography, Scene
Position, Voice Record
mode, check, and then
set to AUTO mode.
(12) Press DISP switch.
(13) Open battery cover.
Preparations for adjustment
and measurement
(1) Insert card and close
battery cover.
(2) Switch camera power
ON.
(3) Apply a light shock to the
body.
* Do not apply the shock
directly to the lens or
card cover.
Preparations for adjustment
and measurement
(1) Any subject.
(2) Move zoom between
TELE and WIDE.
(3) Press shutter button and
take photograph.
Preparations for adjustment
and measurement
(1) Any subject.
(2) Set in Movie mode.
(3) Press shutter button to
record movie.
Displayed on LCD monitor
during recording.
(4) Press shutter button to
stop recording.
FinePix F601 Zoom (U/E/EG) SERVICE MANUAL
Adjustment and measurement
method
(2) 3.70±0.05V
(5) LED beside the optical view-
finder is lit green.
Mode LED replay is lit green.
Beep is heard.
Date setting screen displayed.
Press Cancel key.
[NO CARD] displayed.
(7) Lens barrier opens smoothly.
Mode LED AUTO icon is lit red.
(8) Menu screen displayed.
(9) Smooth operation of 8-direc-
tion button, and icon able to be
selected with button.
(11) Smooth operation of mode dial,
only icon on mode LED for
selected mode is lit red.
(12) Latticed area in LCD monitor is
displayed.
(13) Power able to be switched OFF.
Adjustment and measurement
method
(1) Recording check card
Restored when synchroniza-
tion is disrupted.
(3) No problem with LCD monitor
Restored when synchroniza-
tion is disrupted.
Power not switched OFF.
Adjustment and measurement
method
(1) Distance to subject (minimum
60cm).
(2) Lens operates smoothly.
(3) Use AF to check focusing.
LCD monitor target becomes
smaller, and shutter speed and
aperture value displayed.
Viewfinder LED blinks orange.
Adjustment and measurement
method
(2) Standby display on LCD monitor.
Mode LED movie photography
icon lit red.
(3) Movie and audio recording
starts.
(4) Movie and audio recording
ends, and is recorded on smart
media.
Measuring Measurement
instrument point
Visual Viewfinder
LED
LCD monitor
Lens
Camera
speaker
Mode LED
Measuring Measurement
instrument point
LCD monitor
Measuring Measurement
instrument point
Measuring Measurement
instrument point
Subject with
sound (ap-
proximate
brightness of
PTB450).
Mode LED