Removing The Main Pwb Assy - FujiFilm FinePix S1500 Service Manual

Confidential: FUJIFILM Service Center Use Only
FinePix S1500 Service Manual
2-6.

Removing the MAIN PWB ASSY

(1) Remove the BATTERY COVER CONST.
(2) Pull off the LENS FPC MYLAR as shown in the
figure.
(3) Unlock the connector and remove the CCD FPC.
(4) Unlock the connector and remove the LENS FPC.
(5) Unlock the connector and remove the LENS FPC.
(6) Remove the solder in 5 locations.
(7) Remove the solder in 10 locations.
(8) Remove the TAPE GASKET.
(9) Remove the 2 screws (M1.7 x L3.5).
(10) Pull off the BATTERY COVER MYLAR.
(11) Remove the MAIN PWB ASSY in the direction of the
arrow.
[Notes on Assembly]
(1) The wire harness is soldered with MAIN PWB ASSY
as shown in figure.
(Note that solder doesn't adhere to A point)
(2) Secure the wire harness by Bond.
Bond: ZS00129-100 (No.1401C)
2. Disassembly
2
11
6
4
3
1
2
7
9
6
5
8
10
1
A
2-9