FujiFilm FinePix F601 Zoom Service Manual page 37

FinePix F601 Zoom (U/E/EG) SERVICE MANUAL
Screen (Fig.20)] is displayed. Make the following prepa-
rations.
(1) Leave the distance between the camera and the pat-
tern box unchanged.
(2) Remove the filter (LB140) from the front of the cam-
era.
When preparations are complete, press the [Enter] key
on the computer.
---> CAM Adjustment (without filter, second cycle) begins.
---> Save the adjusted data to the flash ROM when CAM
Adjustment (without filter, second cycle) is completed
normally.
<Step 6>
When adjusted data is saved normally, [CAM Adjust-
ment Complete Screen (Fig.21)] is displayed. Press the
[Enter] key on the computer.
---> The [Adjustment Select Screen (Fig.4)] is displayed.
Select and make any further adjustments from the
screen.
(note)
Ensure that AF adjustment → Flash adjustment is
performed with CAM adjustment.
4. Adjustment
<Fig.20> CAM Adjustment (without filter, second cycle) Screen
<Fig.21> CAM Adjustment Complete Screen
37