Setting The Dual Time - Suunto Spartan User Manual

In the dual time mode (fig. 29):
• field 1 displays dUa indicating "dual time",
• field 2 displays the current time, and
• field 3 displays the dual time (e.g. your home time).
the user can display the seconds while in this sub mode by pressing the [+] button, in field 3 the seconds will
appear for 10 seconds. afterwards the display returns back to showing the dual time.

2.5.1. setting the dual Time

In the dual time sub mode:
1. PRESS the [Select] button and hold in for 2 seconds. Located in Field 3, the hours will begin to flash.
2. PreSS the [+] button to scroll the hours upward or
PreSS the [-] button to scroll the hours downward.
3. at the hour desired, PreSS the [Select] button to move to the next setting. located in field 3 to the right
of the hour value, the minutes will begin to flash.
4. PreSS the [+] button to scroll the minutes upward or
PreSS the [-] button to scroll the minutes downward.
5. at the minutes desired, PreSS the [mode] button to accept the changes and exit the setup program.
6. the dual time setup is complete.
the dual time stays the same, even though the time in the main time mode is adjusted. for example, if you set
the dual time to show your home time, your home time will always be displayed in this sub mode even though
you travel to a different time zone and adjust the time in the main time mode.
Note: The dual time function is completely independent and does not affect the alarms or the memory functions.
These are dependent of the current local time.
22