Clearing The Logbook History - Suunto Spartan User Manual

In the second display (fig. 18):
• field 1 displays the text "HI";
• field 2 displays the highest altitude recorded since the last date cleared; and
• field 3 displays the date when it was reached with the text "log Book" to the left.
In the third display (fig. 19):
• field 1 displays the text "aSC";
• field 2 and 3 show up to an 8 digit accumulative vertical ascent since the last reset. field 2 is activated
• when the value of the vertical ascent is beyond the 3 digit value displayed in field 3.
In the fourth display (fig. 20):
• field 1 displays the text "dSC";
• field 2 and 3 show up to an 8 digit accumulative vertical descent since the last reset. field 2 is activated
when the value of the vertical ascent is beyond the 3 digit value displayed in field 3.

3.5.1. Clearing the logbook history

to clear the history of the logbook (fig. 21):
1. In any of the logbook history displays, PreSS the [Select] button and hold in for 2 seconds. located in
Field 1 is the text "CLR"; in Field 2 the text "HIS"; and in Field 3, "nO" will begin to flash.
2. PreSS the [+] button to toggle between "YeS" and "no".
3. PreSS the [mode] button to accept the option "YeS".
the logbook history is erased and a new starting date is set to begin new cumulative measurements.
Note: If the user does not press any button for 1 minute in the setup mode, the display will automatically
exit setup.
We recommend that the logbook history be cleared prior to beginning logbook recording(s).
30