CITROEN C5 Handbook page 153

C5
[1] Belt tension measuring instrument
[2] Tension lever
[3] Engine flywheel peg
[4] Belt retaining pin
[5] Camshaft pinion peg
[6] Engine flywheel lock
[7] Set of blocking plugs
[8] Crankshaft pulley extractor
Peg : - The engine flywheel, using tool [3]. (From under the vehicle)
WARNING : On removing screws (6), (7), (9), and (5) of the timing cover, refit the
screw (5) equipped with a spacer (thickness: 17 mm)
Tighten to 1,5 ± 0,1 m.daN.
(The screw (5) is one of the screws fixing and sealing the water pump).
WARNING : Should it be impossible to peg the camshaft, check that the off-
set between the camshaft pinion hole and the pegging hole is not more than
1 mm, with the help of a mirror " a " and a Ø 7 mm screw.
IMPERATIVE : If pegging is impossible, restart the adjusting.
(See corresponding operation).
B1EP14AC
CHECKING AND SETTING THE VALVE TIMING
Engines : RHY - RHS - RHZ
Tools
Checking the setting of the valve timing.
- The camshaft, using tool [5].
B1BP282C
150
9
N° RPO 9127
: 4122-T
: (-).188.J2
: (-).188.X
: (-).0188.K
: (-).0188.M
: (-).0188.F
: (-).0188.T
: (-).0188.P
B1EP152D B1BP1YSC