C5
CHECKING AND SETTING THE VALVE TIMING
9
Engines : RHY - RHS - RHZ
N° RPO 9128
Lock the engine flywheel, using tool [6].
Slacken : The accessories drive pulley (8).
The screw (17) of the tensioner roller (18).
Fit the tool [1].
Turn the tensioner roller, using tool [2], to attain a tension of :
54 ± 2 SEEM units.
Tighten screw (17) of the tensioner roller (18) to 2,5 ± 0,2 m.daN.
Remove tool [1].
Fit tool [1].
The tension value should be :
54 ± 3 SEEM units.
ESSENTIAL : If the value is incorrect, recommence the operation.
Remove tools [1], [3], [5] and [6].
Rotate the crankshaft two times in the normal direction of rotation.
Peg :
The crankshaft, using tool [3].
The camshaft drive pulley.
IMPERATIVE : If the pegging is not possible, recommence the operation.
B1EP1ACC
162