CITROEN C5 Handbook page 157

C5
B1EP156D
CHECKING AND SETTING THE VALVE TIMING
Engines : RHY - RHS - RHZ
Tighten :
The screw of the roller (19) to 2.5 ± 0.2 m.daN.
The screws (21) to 2 ± 0.2 m.daN
Remove the tool [1].
Refit the tool [1].
Tension value should be :
IMPERATIVE : If value is incorrect, restart the operation.
Remove tools [1], [3] and [5].
Rotate the crankshaft 2 times (normal direction of rotation).
Fit the tool [3].
WARNING : Should it be impossible to peg the camshaft, check
that the offset between the camshaft pinion hole and the pegging
hole is not more than 1 mm.In the case of an incorrect value,
recommence the operation.
- Déposer l'outil [3].
- Terminer la repose des éléments.
154
9
Setting the valve timing (continued).
54 ± 3 SEEM units
N° RPO 9127