CITROEN C5 Handbook page 131

ALL TYPES
NEW FITTING 2003
CHECKING AND SETTING THE VALVE TIMING
9
(6) Crankshaft pinion.
(7) Accessories drive pulley.
(8) Washer.
(9) Screw.
The pinion (6) is fitted as an idler on the crankshaft.
The accessories drive pulley (7) is immobilised on the crankshaft by a half-moon keyway and by
the tightening of the shouldering of the washer (8) with the screw (9).
A : Pegging on manual gearbox.
B : Pegging on automatic gearbox.
B1EP1B9D
The crankshaft is pegged on the flywheel or on the converter drive plate (automatic gearbox).
The peg hole on the cylinder block (exhaust side) is calibrated and reinforced.
IMPERATIVE : Never turn the crankshaft with the accessories drive pulley slackened.
IMPERATIVE : Never remove the accessories drive pulley without pegging the crankshaft
and camshafts.
IMPERATIVE : Always turn the crankshaft in the direction of rotation of the engine.
B1BP2V2D
Engine : 6FZ - RFN - RLZ - 3FZ
128
9
2003