CITROEN C5 Handbook page 136

CHECKING AND SETTING THE VALVE TIMING
Setting the timing (continued)
Turn the tensioner roller (8), using tool [5a] to go past the notch (b).
Position tool [5b] to lock the index (a) and remove tool [5a].
Reposition the timing belt (7) on the crankshaft pulley.
Hold the timing belt (7) using tool [3].
Fit the timing belt (7) in place, strictly in the following sequence:
- Guide roller (10).
- Inlet camshaft pulley (6).
- Exhaust camshaft pulley (5).
- Coolant pump (11).
B1EP1BCD
- Tensioner roller (8).
NOTE : Make sure that the belt (7) is as flush as possible with the outer face of the various pinions and
rollers.
Remove :
- Tool [3].
- Tool [1] from the exhaust camshaft pulley.
- Tool [5b] from the tensioner roller (8).
Refit :
- The lower timing cover (4) (by moving the engine).
- The crankshaft pulley (2)
- The screw (3) of the crankshaft pulley.
Tighten the screw (3) to 4 ± 0,4 m.daN, then angular-tighten to 53° ± 4°, using tool [4].
B1EP1BDC
Engines : 6FZ - RFN - RLZ - 3FZ
133
ALL TYPES
9
2003