Stop the engine
Preferably allow the engine to idle for a minute to obtain
normal working temperature before stopping it if it has been
working hard.
1 Lift up the cutting unit by pulling the lever backwards to its
locked position.
2 For FR 2211 R and FR 2211 M
Pull back the throttle and move the gear shift lever to the
neutral position "N", without pressing in the reversing lock
button. Turn the ignition key to the "STOP".
3 For FR 2213 MA and FR 2216MA 4X4
Pull back the throttle and turn the ignition key to the
"STOP" position.
STOP
START
4 When the Rider is at a standstill, press down the parking
brake and push in the locking button.
18 –
English
Driving