Icom IC-E80D Instruction Manual page 141

D Digital repeater setting (D RPT)
When accessing a digital repeater that has a call sign is dif-
ferent than the transceiver's current call sign, the repeater
call sign can be stored into "RPT1" automatically by reading
the repeater's downlink signal.
D RX call sign auto write (CALL W)
When your own individual station call is received, the calling
station call sign can be automatically set in "UR" of the cur-
rent call sign.
D Repeater call sign auto write (RPT W)
When your own individual station call is received via the D-
STAR repeater, the repeater call sign can be set into "RPT1"
and/or "RPT2" automatically by reading the repeater's down-
(default: ON) link signal.
The transceiver sets the received repeater call sign for op-
eration, over-writing the current repeater call sign.
D DV auto detect (DV DET)
(default: OFF)
When a signal other than DV mode is received during DV
mode operation, the transceiver has capability of automatic
FM mode selection.
• OFF
• ON
MENU SCREEN OPERATION
: Operating mode is fixed in DV.
: The transceiver automatically selects FM
mode for temporary operation.
12
1
2
3
4
5
(default: OFF)
6
7
8
9
10
11
12
13
14
(default)
15
16
17
18
19
133