Menu Screen Operation; General - Icom IC-E80D Instruction Manual

General

MENU screen is used for programming infrequently changed
values or conditions of functions.
D Entering MENU screen and operation
[Example]: Set "KEY B (Key-touch beep)" to OFF.
q Push [MENU
] to enter MENU screen.
• "DUP.T," "SCAN," "SET," "DV SET," "CALL-S," "RX CAL," "MES-
SAG," "RPT-L" or "GPS" appears.
w Push [ ](2) or [ ](8) (or rotate [DIAL]) to select the de-
sired menu group, then push [ ](5) (or [ ](6)).
[EXAMPLE]: Set "KEY B (Key-touch beep)" to OFF.
[DIAL]
Push

MENU SCREEN OPERATION

. Push to select "SET."
Enter menu screen
Push to select "KEY B."
e When "SET" is selected, push [ ](2) or [ ](8) (or rotate
[DIAL]) to select the desired function group, then push
[ ](5) (or [ ](6)).
r Push [ ](2) or [ ](8) to select the desired item, then push
[ ](5) (or [ ](6)).
t Push [ ](2) or [ ](8) (or rotate [DIAL]) to select the de-
sired value or condition, then push [ ](5) (or [ ](4)) to
return to the setting item selection mode.
y Push [MENU
] (or [V/MHz]) to return to the frequency
screen, repeat steps w to r to set another items.
Push .
Push
Push to select "OFF," then push
Push .
12
to select "SOUNDS."
Push .
.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
115