Ethernet Controls - Honeywell IQ Force Dock Reference Manual

Dock Controls and Instrument Status

3.1.13 Ethernet Controls

For docks that are connected by ethernet, there are two additional con trols
on the lower-right corner of the display: Ethernet and Ping.
To view the Ethernet settings, click on the Ethernet... button.
To use DHCP for network addressing, select Use Dynamic Ethernet
30
Addressing. To use the entered static IP address, uncheck the box.
To test the dock connection, press the Ping... button. A status window will
be shown to indicate whether the ping was successful or not.
IQ Force™ Dock Reference Manual