Dock Controls and Instrument Status
3.1.11 Saving new settings
When all necessary changes have been made, press the Set Config button
to upload the new settings to the dock.
The software will notify you once the dock configuration has been updated.
NOTE
The new settings are not saved to the dock until Set
Config is selected.
29
3.1.12 Dock LCD Display
At the lower left corner of the Dock status tab is Dock LCD Display window.
This is most often used when a dock is controlled remotely via Ethernet,
where the PC user is unable to physically see the dock.
To view the dock's Display, click on Get Current LCD DIsplay.
IQ Force™ Dock Reference Manual