Honeywell IQ Force Dock Reference Manual page 31

Initial PC–Dock Connection
Dock Status (USB Connection)
NOTE
If the dock is connected to the PC via ethernet, see the
Status Indicators section of the IQ Ethernet Instruction
Booklet.
The current status of each dock is shown in the left column. When there are
no instruments in the dock, each of the status indicators will be shown in grey.
When an instrument is placed in the dock, the green "Detected" indicator
will light to reflect the new status. Status changes are also be shown on
the dock's LCD.
During processing, the yellow "Processing" indicator LED will come on.
23
The dock operations performed on the instrument are listed as they occur.
If the dock is able to successfully complete the processing dictated by the
instrument's template in the IQ Database Manager Pro Program, the green
"OK" indicator be illuminated.
If there is a fault, the red "Fault" indicator will come on.
NOTE
For more information regarding template settings, see the
IQ Database Manager Pro Reference Manual.
IQ Force™ Dock Reference Manual