Initial PC–Dock Connection
3. Software
To launch the IQ Force dock desktop application, click on the IQ Force dock
icon on your PC's desktop.
NOTE
The Database Manager must be launched prior to launching
the IQ Force dock Software to establish a database before
the application will start normally.
The application may also be launched by accessing the program through
the start button and selecting Programs/Honeywell/ IQ Pro/IQ Force/IQ Force
(unless another location was specified during the installation).
22
The following screen will be shown once the application is launched.
The screen is divided into right and left sides. The left side gives the status
of the docks that are currently installed and recognized. At the top of the right
side of the screen there is a tab for each dock that is currently installed and
recognized. Within each dock tab are two sub-tabs: one for dock controls
and one that shows the calibration status and details for the instrument that
is currently in the dock or the last instrument tested.
IQ Force™ Dock Reference Manual