Camera Settings; Focus; Auto Exposure (Ae) - Sony DynaView SSC-CR441 Operating Instructions Manual

Camera Settings

FOCUS

Main menu → :CAMERA SETUP:
menu
→ :FOCUS: menu
• In manual focus mode, NEAR or FAR
keys are available for control focus
position.
• One push auto focus feature is equipped
when focus mode will be selected to
manual mode. Shortcut key combination
(number "74" + PRESET key) is
available for activating this function.
• Three focus modes are available:
Manual, Auto, and Zoom trigger.
• In ZOOM TRIGGER mode, the camera
will remain in auto focus mode until the
control signals for ZOOM IN or ZOOM
OUT are received from the keypad.
• Active time for auto focus action in
ZOOM TRIGGER mode and one push
auto focus mode can be selected from
between 1 and 60 seconds.
• Auto focus sensitivity can be set to
Normal or Low.
Adjust Focus Setting Options
1
Press "95," and then hold the
PRESET key for 3 seconds to enter
the main menu screen.
24
Camera Settings
2
Highlight :CAMERA SETUP:, and
then press the OPEN key to enter the
:CAMERA SETUP: menu.
3
Highlight :FOCUS:, and then press
the OPEN key to enter the option.
4
Highlight MODE, and then press the
OPEN key to enter the mode
selection menu.
5
Move the joystick up and down to
choose the function to use.
6
Press the OPEN key to confirm, or
press CLOSE to cancel selection and
exit from the menu screen.

AUTO EXPOSURE (AE)

Main menu → :CAMERA SETUP:
menu
→ :AE1: menu
WDR, DAY/NIGHT and D/N THRESHOLD are
displayed only when you use the SSC-CR481.
• In AE MANUAL mode or IRIS
PRIORITY mode, OPEN or CLOSE
keys are available for control iris
position.
• AE mode is divided into 4 categories:
FULL AUTO, SHUTTER, IRIS
PRIORITY and MANUAL.
• In FULL AUTO mode, the shutter speed
is fixed at 1/50 sec (PAL), and the camera
→ :AE2: menu