Zoom - Sony DynaView SSC-CR441 Operating Instructions Manual

3
Highlight :AE1: or :AE2:, and then
press the OPEN key to enter Auto
exposure mode.
4
Highlight the desired option, and then
press the OPEN key to enter.
5
Move the joystick up and down to
choose the function to use.
6
Press the OPEN key to confirm, or
press CLOSE to cancel selection and
exit from the menu screen.

ZOOM

• SSC-CR441
Maximum optical zooming: 18×, 216×
with digital zooming.
• SSC-CR481
Maximum optical zooming: 36×, 432×
with digital zooming.
Main menu → :CAMERA SETUP:
menu
→ :ZOOM: menu
Select the Zoom Mode
1
Press "95," and then hold the
PRESET key for 3 seconds to enter
the main menu screen.
26
Camera Settings
2
Highlight :CAMERA SETUP:, and
then press the OPEN key to enter the
:CAMERA SETUP: menu.
3
Highlight :ZOOM:, and then press the
OPEN key to enter the :ZOOM:
menu.
4
Highlight ZOOM, and then press the
OPEN key to select DIGITAL
ZOOM ON or OFF.
5
Move the joystick up/down to choose
ON or OFF.
6
Press the OPEN key to confirm, or
press CLOSE to cancel selection and
exit from the menu screen.
Select the Zoom Speed
9 steps of zoom speeds are available: 0 - 7
steps can be set by menu; when set to EXT
mode, the command should be issued
through the RS485 interface.
Adjust the Zoom Speed
1
Press "95," and then hold the
PRESET key for 3 seconds to enter
the main menu screen.
2
Highlight :CAMERA SETUP:, and
then press the OPEN key to enter the
:CAMERA SETUP: menu.
3
Highlight :ZOOM:, and then press the
OPEN key to enter the :ZOOM:
menu.
4
Highlight ZOOM SPEED, and then
press the OPEN key to enter zoom
speed selection.
5
Move the joystick up/down to choose
the desired zoom speed.