Storing Camera Settings; Setting The Speed Of The Camera Moving To A Preset Position - Sony BRC-H700 System Manual

Storing the Camera Setting in
Memory

Storing camera settings:

Memory Preset feature
To store the camera settings
Lights for positions 1 to 8.
Lights for positions 9 to 16.
4 2
RESET
4
1
Press the CAMERA button to select the required
camera.
2
Press the PAN/TILT RESET button to reset the pan/
tilt position.
3
Adjust the position, zooming, focusing, and
backlighting of the selected camera.
4
While holding down the PRESET button (for
positions 1 to 8) or the SHIFT and PRESET buttons
(for positions 9 to 16), press any of the POSITION
buttons in which you want to store settings.
While holding down (for POSITION 1 to 8)
Press a POSITION button.
While holding down (for POSITION 9 to 16)
Settings are stored in the memory of the camera.
The pressed button flashes during storing. Flash-
ing stops when storing is completed.
To recall the stored settings
Press any of the POSITION buttons in which you
have stored the settings. For positions 9 to 16, hold
down the SHIFT button and press any of the
POSITION buttons.
To cancel the preset memory
While holding down the RESET button (for positions
1 to 8) or the SHIFT and RESET buttons (for positions
9 to 16), press the POSITION button from which you
want to cancel the settings.
1
While holding down (for POSITION 1 to 8)
Press a POSITION button.
While holding down (for POSITION 9 to 16)
The pressed button flashes while settings are
being cancelled. Flashing stops when the
settings have been canceled.
Important note:
Note
with the settings stored in POSITION 1.
position when the power is turned off and turned
on again, store those positions in POSITION 1.
one position, you cannot call up, store or cancel
the settings in another position.
Setting the speed of the camera
moving to a preset position
You can select the panning/tilting speed when
the camera moves to a preset position.
1
Press the CAMERA button to select the required
camera.
2
Press the POSITION button for which you want to
set the speed for more than one second. All of
the CAMERA buttons, 1 to 7, flash.
3
Press one of the CAMERA buttons to select the
speed.
CAMERA button
1
2
3
4
5
6
7
Now the camera will move to the position preset
to the pressed POSITION button with the selected
speed.
To set the speed of the camera moving to a
preset position between 9 and 16
Hold down the SHIFT button and press the
corresponding POSITION button for more than one
second. The POSITION 1 to 8 buttons can be used
for positions 9 to 16.
Panning/tilting speed
1 degree/sec.
2.2 degree/sec.
4.8 degree/sec.
11 degree/sec.
23.3 degree/sec.
43 degree/sec.
60 degrees/sec. (default)
Remote Operation
31