Auto Flip; Manual Speed; Manual Limit Stops - Sony DynaView SSC-CR441 Operating Instructions Manual

Color video camera
Table of Contents

Advertisement

3
Highlight :TOUR & SCAN:, and then
press the OPEN key to enter the
:TOUR & SCAN: menu.
4
After confirmation of action mode,
highlight the STOP TIME item, and
then press the OPEN key to enter.
5
Move the joystick up/down to choose
the desired preset position, move left/
right to set the time.
6
Press the OPEN key to confirm, or
press CLOSE to cancel selection and
exit from the menu screen.

AUTO FLIP

The auto flipping function will enable the
camera to quickly flip 180° in the vertical
direction.
Activate 180° Auto Flip
1
Press "95," and then hold the
PRESET key for 3 seconds to enter
the main menu screen.
2
Highlight :PAN TILT SETUP:, and
then press the OPEN key to enter the
:PAN TILT SETUP: menu.
3
Highlight :OTHERS:, and then press
the OPEN key to enter the :OTHERS:
menu.
4
Highlight AUTO FLIP and then press
the OPEN key to enter.
5
Move the joystick up/down to choose
ON or OFF.
6
Press the OPEN key to confirm, or
press CLOSE to cancel selection and
exit from the menu screen.

MANUAL SPEED

The scan speed that can be set in manual
scan mode is 30°/s, 60°/s, 90°/s and 120°/s.
The tilt speed will also be adjusted to 15°/s,
30°/s, 45°/s and 60°/s following with the
scan speed setting.
1
Press "95," and then hold the
PRESET key for 3 seconds to enter
the main menu screen.
2
Highlight :PAN TILT SETUP:, and
then press the OPEN key to enter the
:PAN TILT SETUP: menu.
3
Highlight :OTHERS:, and then press
the OPEN key to enter the :OTHERS:
menu.
4
Highlight MANUAL SPEED, and
then press the OPEN key to enter.
5
Move the joystick up/down to choose
the desired zoom speed.
6
Press the OPEN key to confirm, or
press CLOSE to cancel selection and
exit from the menu screen.

MANUAL LIMIT STOPS

When using the joystick to control the
horizontal panning, the camera will stop
panning once it reaches the scan limit. The
scan limit can be configured as left and right
limit.
Activate MANUAL LIMIT
STOPS
1
Press "95" + hold the PRESET key
for 3 seconds to enter the main menu
screen.
Horizontal Pan/Vertical Tilt Setup
35

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dynaview ssc-cr481

Table of Contents