Preset Commands - Sony DynaView SSC-CR441 Operating Instructions Manual

Preset Commands

Preset Commands
Use the keypad controller preset commands to quickly execute specific functions or perform
setting changes. Refer to the following table for button combinations and corresponding
functions. The following commands are for using with keypad controllers Pelco-D.
Shortcut key (+Preset)
1 - 32+ Preset
33+ Preset
34+ Preset
35 - 66+ Preset
70+ Preset
71+ Preset
72+ Preset
73+ Preset
74+ Preset
75+ Preset
76+ Preset
77+ Preset
78+ Preset
79+ Preset
80+ Preset
88+ Preset
89+ Preset
96+ Preset
97+ Preset
98+ Preset
Function & Action
Move the camera to the preset points if the points are
preset, the set words is displayed.
180° Pan rotation
Pan zero
Move the camera to the preset points if the points are
preset, the set words is displayed.
Begin TOUR - TOUR A
Backlight compensation ON
Backlight compensation OFF
White balance - one push
Focus - one push
Show software version, "Version, Protocol, Address,
Baud Rate" appears on the screen.
Pan and Tilt zero
Begin TOUR - TOUR B
Begin TOUR - TOUR C
Begin TOUR - TOUR D
Begin TOUR - TOUR E
Color mode (daytime)
Monochrome mode (nighttime)
Stop scanning and tour
Start random scanning
Start frame scanning
55
Preset Commands