Camera Title; Camera Title Input - Sony DynaView SSC-CR441 Operating Instructions Manual

CAMERA TITLE

Main menu → :CAMERA TITLE:
menu

CAMERA TITLE INPUT

A camera title of up to 20 characters can be
set and displayed at the top or bottom of the
screen.
Input the Camera Title
1
Press "95," and then hold the
PRESET key for 3 seconds to enter
the main menu screen.
2
Highlight :CAMERA TITLE:, and
then press the OPEN key to enter the
:CAMERA TITLE: menu.
3
Highlight TITLE INPUT, and then
press the OPEN key to enter.
4
Move the joystick up/down to select
the desired character, and then move
the joystick left/right to highlight the
desired position.
5
Press the OPEN key to confirm, or
press CLOSE to cancel selection and
exit from the menu screen.
Set the Camera Title Position
The camera title POSITION can be set at
the top (UP) or bottom (DOWN) of the
screen.
Set the Camera Title
The camera TITLE can be set to display
(ON), or not display (OFF).
37
CAMERA TITLE