Sony DynaView SSC-CR441 Operating Instructions Manual page 31

4
Highlight MASK ENABLE, and then
press the OPEN key.
5
Move the joystick up/down to set ON/
OFF.
6
Press the OPEN key to confirm, or
press CLOSE to cancel selection and
exit from the menu screen.
Set Privacy Area Size and
Position
1
First move the image to be masked to
the center of the screen.
2
Press "95," and then hold the
PRESET key for 3 seconds to enter
the main menu screen.
3
Highlight :CAMERA SETUP:, and
then press the OPEN key to enter the
:CAMERA SETUP: menu.
4
Highlight :OTHERS:, and then press
the OPEN key to enter the :OTHERS:
menu.
5
Highlight :MASK AREA SETUP:
and then press the OPEN key.
6
Screen display: PRIVACY AREA 1
Move the joystick up/down to select
the area number to set.
7
Press the OPEN to confirm selection,
and then go to the setup screen for the
area size:
Screen display: PRIVACY MASK
SIZE
Move the joystick up/down to set the
area height.
8
Press the OPEN to key to confirm the
area size, and then go to the setup
screen for the area color:
Screen display: PRIVACY MASK
COLOR
Move the joystick up/down to select
the area color (black or white).
9
Press the OPEN key to confirm the
area color and then go to the next area
setting screen, or press the CLOSE
key to exit the privacy area setup
mode.
Notes
• It is recommended to set the privacy
masking area sufficiently larger than the
actual area, to ensure that privacy area is
not revealed during movement.
• Privacy area will zoom with the lens
zoom level to ensure the effect.
31
Camera Settings