Key To Symbols; Symbols - Jonsered FR2218FA2 Operator's Manual

Symbols

These symbols are on the machine and in the instructions.
WARNING! Careless or incorrect use can
result in serious or fatal injury to the
operator or others.
Please read the operator's manual
carefully and make sure you understand
the instructions before using the machine.
Always wear:
• Approved hearing protection
This product is in accordance with
applicable EC directives.
Fast
Slow
Stop the engine.
Choke.
Fuel
Oil level
Cutting height
Backwards
Forwards
Ignition
Hydrostatic freewheel
Parking brake
6 –
English

KEY TO SYMBOLS

Noise emission to the environment
according to the European Community's
Directive. The machine's emission is
specified in the Technical data chapter and
on the label.
Clutch in
Clutch out
Warning: rotating parts. Keep hands and
feet clear.
Rotary blades Keep hands and feet
away from under the hood when the
engine is running
Hot surface.
Never drive across a slope
Never use the machine if persons,
especially children, or animals, are in the
vicinity
Never carry passengers on the machine or
equipment
Drive very slowly if no cutting unit is fitted
Cutting deck must be fitted before
driving at full speed.
Brake
Switch off the engine and take off the ignition
cable before repairs or maintenance
>10