Napoleon GVF42N Installation And Operation Instructions Manual page 11

LOUVRE BRACKET INSTALLATION
1. Align the holes in the louvre
brackets with the pre-drilled
holes in the firebox, as shown.
2. Secure louvre brackets in
place using screws.
GDL42 LOUVRE INSTALLATION
UPPER LOUVRE
15
DOOR LATCH
HINGE SCREEN
16
FIGURE 14
Insert the upper louvres
into the slots on both brack-
ets.
Attach each hinge on the
lower louvre assembly to
the lip of the fireplace base
with 2 screws.
Position the hinge screen
into place and with the con-
trol door open, secure to
the fireplace using three
screws.
L42 LOUVRE INSTALLATION
FIGURE 17
A
B
S L O T
TA B
A
B
HINGE
S L O T
CLIP
LOGO PLACEMENT
Remove the backing of
the logo supplied and
place on the screen
cover, as indicated.
FIGURE 18
UPPER LOUVRES
Insert the louvre tabs into the
slots located at the top left and
right corners of the unit.
LOWER LOUVRES
Insert the hinge clips into the
slots located at the bottom left
and right corners of the unit.
To remove the louvres, pull the
back tabs of the clips forward,
while pushing the louvre assem-
bly back. Lift the clip.
W415-0379 / B / 08.03.05
11