Technical Specifications - Motorola Symbol DS3408 Product Reference Manual

3 - 4 Symbol DS3408 Product Reference Guide
Troubleshooting (Continued)
Table 3-1
Problem
Digital scanner emits low/high/low
beeps.
Digital scanner emits a power-up beep
after changing USB host type.
Digital scanner emits one high beep
when not in use.
NOTE If after performing these checks the digital scanner still experiences problems, contact the distributor or
Motorola Enterprise Mobility Support. See

Technical Specifications

Technical Specifications
Table 3-2
Item
Power Requirements
Power Source
Decode Capability
Beeper Operation
Beeper Volume
Beeper Tone
Field of View
Yaw Tolerance
Pitch Tolerance
Possible Causes
Clearing Code 39 buffer.
The USB bus re-established power to
the digital scanner.
In RS-232 mode, a <BEL> character
was received and Beep on <BEL>
option is enabled.
page xvii
5 VDC + / - 10% @ approximately 240 mA RMS (nominal), 500 mA (max)
Depending on host:
•
Host powered
•
External power supply, 5.2 V nominal
UPC/EAN, UPC/EAN with supplementals, JAN 8 & 13, Bookland EAN, Coupon
Code, Code 128, GS1-128, Code 39, Code 39 Full ASCII, Code 39 Trioptic, Code
32, Code 93, Code 11, Interleaved 2 of 5, Discrete 2 of 5, IATA 2 of 5, Codabar
(NW7), MSI, Inverse 1D, US Postnet, US Planet, UK Postal, Japan Postal,
Australia Postal, Netherlands KIX Code, USPS 4CB/One Code/Intelligent Mail,
UPU FICS Postal, GS1 DataBar, Composite Codes, PDF417, MicroPDF,
Maxicode, Data Matrix (ECC 200), Data Matrix Inverse, QR Code, MicroQR, QR
Inverse, Aztec, Aztec Inverse.
User-selectable: enable, disable
User-selectable: three levels
User-selectable: three tones
30º +/- 2º horizontal
22.5º +/- 2º vertical
± 50° from normal
± 60° from normal
Possible Solutions
Normal when scanning the Code 39
Buffering Clear Buffer bar code or
upon attempt to transmit an empty
Code 39 buffer.
Normal when changing USB host
type.
Normal when Beep on <BEL> is
enabled and the digital scanner is in
RS-232 mode.
for the telephone numbers.
Description