Rts Line State; Beep On <Bel - Motorola Symbol DS3408 Product Reference Manual

RTS Line State

This parameter sets the idle state of the Serial Host RTS line. Scan a bar code below to select Low RTS or High
RTS line state.
*
Host: Low RTS
Beep on <BEL>
If you enable this parameter, the digital scanner issues a beep when it detects a <BEL> character on the RS-232
serial line. <BEL> gains a user's attention to an illegal entry or other important event.
Beep On <BEL> Character
(Enable)
Host: High RTS
*
Do Not Beep On <BEL> Character
(Disable)
RS-232 Interface 7 - 17