Chapter 3 Specifications; Introduction; Technical Specifications - Motorola SE3300 Integration Manual

CHAPTER 3 SPECIFICATIONS

Introduction

This chapter provides the technical specifications of the SE3300, including decode zone and exit window
characteristics.

Technical Specifications

SE3300 Technical Specifications
Table 3-1
Power Requirements - Input Voltage
Operating Mode Supply Currents (conditions VCC=VCC_SENSOR=VCC_ILLUM = 3.3VDC) (at 23° C):
Low Power
Idle
Image Acquisition
Illumination Enabled
Maximum Operating Current (aiming on
during exposure, illumination enabled)
Maximum Sensor Power Supply Noise*
(at 23° C)
*For better image quality in image capture applications, use an additional filter on VCC_SENSOR. For
additional performance improvement, provide a separately regulated 3.3 V supply for the sensor.
Item
3.3 V ± 0.3 V at 23° C
SE3300SR / SE3300HD:
500 μA
18 mA
80 mA
250 mA
275 mA
100 mVp-p (3.3 V, 10 Hz - 100 kHz) for decoding
30 mVp-p (3.3 V, 10 Hz - 100 kHz) for image capture
Description
SE3300WA:
500 μA
18 mA
80 mA
200 mA
250 mA