Page 1 DS3578 with FIPS Digital Scanner Product Reference Guide...
Page 3 DS3578 with FIPS Digital Scanner Product Reference Guide 72E-153466-04 Revision A May 2012...
Page 4 Except as noted below, such license may not be assigned, sublicensed, or otherwise transferred by the user without prior written consent of Motorola. No right to copy a licensed program in whole or in part is granted, except as permitted under copyright law. The user shall not modify, merge, or incorporate any form or portion of a licensed program with other program material, create a derivative work from a licensed program, or use a licensed program in a network without written permission from Motorola.
Page 5 NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. Motorola Solutions, Inc. One Motorola Plaza Holtsville, New York 11742-1300 http://www.motorolasolutions.com. Warranty For the complete Motorola Solutions hardware product warranty statement, go to: http://www.motorola.com/enterprisemobility/warranty.
Page 6: Revision History
Smart LED Mode, Focus Mode. Add DS3578-ER decode zones. Update Technical Specifications with DS3578-ER specifications. -03 Rev A 3/2012 Add notes to indicate that the DS3578-ER and DS3578-DP do not support Multicode Mode, and that the DS3578-ER does not support imaging preferences. -04 Rev A 5/2012...
Page 7: Table Of Contents
Table of Contents About This Guide Introduction ........................xv Configurations........................ xv Chapter Descriptions ..................... xvi Notational Conventions....................xvii Related Documents ....................... xviii Service Information......................xviii Chapter 1: Getting Started Introduction ........................1-1 Interfaces ........................1-2 Unpacking the Scanner ....................1-2 The Cradle ........................
Page 8 DS3578 With FIPS Digital Scanner Product Reference Guide Scanning ........................2-5 Aiming ........................2-6 Decode Ranges ......................2-8 DS3578-SR/HD/DP Decode Ranges ..............2-8 DS3578-ER Decode Ranges .................. 2-9 Chapter 3: Maintenance and Technical Specifications Introduction ........................3-1 Maintenance ......................... 3-1 Battery Maintenance ....................
Page 9 Focus Mode ......................5-29 Multicode Mode (DS3578-SR / DS3578-HD) ............5-30 Multicode Expression (DS3578-SR / DS3578-HD) ..........5-31 Multicode Mode Concatenation (DS3578-SR / DS3578-HD) ......... 5-37 Multicode Concatenation Symbology (DS3578-SR / DS3578-HD) ......5-38 Multicode Troubleshooting ..................5-39 Miscellaneous Scanner Parameters ................5-41 Transmit Code ID Character ...................
Page 10 DS3578 With FIPS Digital Scanner Product Reference Guide FN1 Substitution Values ..................5-44 Transmit “No Read” Message ................. 5-45 UID Parsing ......................5-46 Chapter 6: Imaging Preferences Introduction ........................6-1 Scanning Sequence Examples ..................6-2 Errors While Scanning ....................6-2 Imaging Preferences Parameter Defaults ..............
Page 11 Table of Contents FN1 Substitution ..................... 7-11 Send Make and Break .................... 7-11 Keyboard Maps ......................7-12 ASCII Character Set ..................... 7-13 Chapter 8: RS-232 Interface Introduction ........................8-1 Connecting an RS-232 Interface .................. 8-2 RS-232 Default Parameters ..................8-3 RS-232 Host Parameters ....................
Page 12 DS3578 With FIPS Digital Scanner Product Reference Guide Optional USB Parameters .................... 9-17 Ignore Beep ......................9-17 Ignore Bar Code Configuration ................9-17 USB ASCII Character Set .................... 9-18 Chapter 10: IBM 468X/469X Interface Introduction ........................10-1 Connecting to an IBM 468X/469X Host ............... 10-2 IBM Default Parameters ....................
Page 13 Table of Contents Chapter 13: Symbologies Introduction ........................13-1 Scanning Sequence Examples ..................13-1 Errors While Scanning ....................13-2 Symbology Parameter Defaults ..................13-2 UPC/EAN ........................13-7 Enable/Disable UPC-A .................... 13-7 Enable/Disable UPC-E .................... 13-7 Enable/Disable UPC-E1 ..................13-8 Enable/Disable EAN-8/JAN-8 ................. 13-8 Enable/Disable EAN-13/JAN-13 ................
Page 14 DS3578 With FIPS Digital Scanner Product Reference Guide Code 11 ........................13-38 Code 11 ........................13-38 Set Lengths for Code 11 ..................13-38 Code 11 Check Digit Verification ................13-40 Transmit Code 11 Check Digits ................13-40 Interleaved 2 of 5 (ITF) ....................13-41 Enable/Disable Interleaved 2 of 5 ................
Page 15 Table of Contents xiii GS1 DataBar Limited ....................13-64 GS1 DataBar Limited Security Level ..............13-65 GS1 DataBar Expanded ..................13-66 Convert GS1 DataBar to UPC/EAN ................ 13-66 Composite ........................13-67 Composite CC-C ..................... 13-67 Composite CC-A/B ....................13-67 Composite TLC-39 ....................13-68 UPC Composite Mode ....................
Page 16 DS3578 With FIPS Digital Scanner Product Reference Guide UPC-E ........................... C-1 UPC-E1 ......................... C-2 EAN-13 ......................... C-2 EAN-8 ........................... C-2 Code 39 ........................C-2 Trioptic Code 39 ......................C-3 Code 93 ........................C-3 Code 11 ........................C-3 Code 128 ........................C-4 Codabar ........................
Page 17: About This Guide
About This Guide Introduction The DS3578 with FIPS Product Reference Guide provides general instructions for setting up, operating, maintaining, and troubleshooting the digital scanner. Configurations DS3578-SR2F005WR - DS3578 digital scanner, standard focus, FIPS, twilight black/yellow DS3578-HD2F005WR - DS3578 digital scanner, high density focus, FIPS, twilight black/yellow...
Page 18: Chapter Descriptions
• Chapter 6, Imaging Preferences provide imaging preference features and programming bar codes for selecting these items. Note that the DS3578-ER does not support these features. • Chapter 7, Keyboard Wedge Interface provides information for setting up the digital scanner for keyboard wedge operation.
Page 19: Notational Conventions
About This Guide xvii Notational Conventions The following conventions are used in this document: • Italics are used to highlight the following: • Chapters and sections in this and related documents • Bold text is used to highlight the following: •...
Page 20: Related Documents
Motorola responds to calls by e-mail, telephone or fax within the time limits set forth in service agreements. If your problem cannot be solved by Motorola Support, you may need to return your equipment for servicing and will be given specific directions. Motorola is not responsible for any damages incurred during shipment if the approved shipping container is not used.
Page 21: Chapter 1 Getting Started
Chapter 1 Getting Started Introduction The DS3578 digital scanner combines excellent 1D and 2D omnidirectional bar code scanning performance and advanced ergonomics in a lightweight design. The digital scanner ensures comfort and ease of use for extended periods of time.
Page 22: Interfaces
The Cradle The cradles serve as a charger and radio communication interface for the DS3578 cordless digital scanner. Some models also provide a host communication interface. There are four versions of the cradle: •...
Page 23 Supported via SNAPI NOTE When using a non-FIPS digital scanner with a STB3578-CF007WR FIPS cradle, some product features are unavailable. For non-FIPS scanners DS3578-SR20005WR, DS3578-HD20005WR, and DS3578-DP20005WR, the following features are not compatible with the FIPS cradle: • FIPS is unavailable •...
Page 24: Cradle Parts
1 - 4 DS3578 With FIPS Digital Scanner Product Reference Guide Cradle Parts Mounting Mounting Screw Hole Screw Hole Pairing Bar Code Mounting Latch Screw Hole Latch Charging/ Communications Contacts Cradle Front View Figure 1-2...
Page 25 Getting Started 1 - 5 Cable Hook Rubber Feet (STB3508/3578 Only) Mounting Screw Hole Mounting Screw Hole Power Port Host Port Power Cable Groove Host Cable Groove Mounting Screw Hole Converter Knob Cradle Back View Figure 1-3...
Page 26: Connecting The Cradle
1 - 6 DS3578 With FIPS Digital Scanner Product Reference Guide Connecting the Cradle Important: Connect the interface cable and power supply (if necessary) in the following order to ensure proper operation of the digital scanner and cradle. Connecting STB3508/3578 Cradle Figure 1-4.
Page 27: Supplying Power To The Cradle
Getting Started 1 - 7 Connecting FLB3508/3578 Cradle Insert the interface cable from the host computer into the cradle's host port. See Figure 1-4. Connect the forklift power supply to the cradle's power port, if applicable. Optionally, thread the host cable over the cable hook and run the host and power cables into their respective cable grooves, or use cable ties to secure them to the mounting plate after attaching it to the cradle.
Page 28: Inserting The Battery
1 - 8 DS3578 With FIPS Digital Scanner Product Reference Guide Inserting the Battery The battery resides in a chamber in the digital scanner handle. To insert the battery: Insert a coin or flathead screwdriver in the slot at the base of the digital scanner, then turn the slot counterclockwise to release the latch.
Page 29: Charging The Scanner Battery In The Cradle
(bus-powered mode), the LED blinks at a slow rate. If the digital scanner’s red LED begins flashing, indicating a charging problem, remove the digital scanner from the cradle and replace the battery. If the red LED continues flashing, contact Motorola Support.
Page 30: Inserting The Scanner In The Cradle
1 - 10 DS3578 With FIPS Digital Scanner Product Reference Guide Inserting the Scanner in the Cradle To insert the digital scanner in the cradle: Insert the digital scanner into the cradle top first. Push the handle until it clicks into place, engaging the contacts in the cradle and digital scanner.
Page 31: Sending Data To The Host Computer
Pair up to 3 scanners per cradle Pair up to 3 scanners per cradle; No FIPS NOTE FIPS is only available when a FIPS enabled digital scanner configuration (DS3578-XX2F005WR) is paired with a FIPS enabled cradle (STB/FLB-CF007WR). Lost Connection to Host If scanned data does not transmit to the cradle's host, ensure that all cables are firmly inserted and the power supply is connected to an appropriate AC outlet, if applicable.
Page 32: Configuring The Scanner
1 - 12 DS3578 With FIPS Digital Scanner Product Reference Guide Configuring the Scanner Use the bar codes in this manual or the 123Scan configuration program to configure the digital scanner. See Chapter 5, User Preferences and each host chapter for information about programming the digital scanner using bar code menus.
Page 33: Chapter 2 Scanning
Chapter 2 Scanning Introduction This chapter provides beeper and LED definitions, scanning techniques, general scanning instructions and tips, and decode zone tables. Beeper Definitions The digital scanner emits different beeper sequences and patterns to indicate its status. Table defines beep sequences that occur during both normal scanning and while programming the digital scanner.
Page 34 2 - 2 DS3578 With FIPS Digital Scanner Product Reference Guide Beeper Definitions (Continued) Table 2-1 Beeper Sequence Indication Wireless Operation Short low-high beeps Scanner has paired with the cradle. Short high-low beeps Scanner has unpaired with the cradle. Note: When connected to a remote device using SPP or HID, if a...
Page 35 Out of rule memory. Erase some existing rules, then try to save rule again. (It is not necessary to re-enter the current rule.) A DS3578 digital scanner was inserted into an STB3478 cradle. Low-high-low beeps ADF transmit error. Cancel rule entry. Rule entry mode exited because of an error or the user asked to exit rule entry.
Page 36: Led Definitions
Green A bar code was successfully decoded. A data transmission error, digital scanner malfunction, or the DS3578 digital scanner was inserted into an STB3478 cradle. Charging Use Green Slow Flash The digital scanner charges at the slow rate (used when a host cable powers the cradle).
Page 37: Scanning
Chapter 1, Getting Started). For assistance, contact the local supplier or Motorola Support. Aim the digital scanner at the bar code. Scanning in Hand-Held Mode: DS3578-SR/HD/DP Figure 2-1 Scanning in Hand-Held Mode: DS3578-ER Figure 2-2 Hold the trigger until the digital scanner beeps, indicating the bar code is successfully decoded. For more...
Page 38: Aiming
Figure 2-4), it may be necessary to tilt the digital scanner at an angle relative to the target (Motorola recommends 25-45 degrees). For example, when scanning a 15 mil dot peen Datamatrix bar code marked on an aluminum surface with the DS3578-DP, present the target between two and three inches from the nose of the digital scanner, and tilt the digital scanner at a 30 degree angle.
Page 39 Scanning 2 - 7 The digital scanner can also read a bar code presented within the aiming pattern but not centered. The top examples in Figure 2-5 show acceptable aiming options, while the bottom examples can not be decoded. 0 1 2 3 4 5 0 1 2 3 4 5 0 1 2 3 4 5 0 1 2 3 4 5...
Page 40: Decode Ranges
2 - 8 DS3578 With FIPS Digital Scanner Product Reference Guide Decode Ranges DS3578-SR/HD/DP Decode Ranges DS3578-SR/HD/DP Series Depth of Field Table 2-4 Label Density DS3578-SR DS3578-HD/DS3578-DP Paper Label English Metric English Metric Code 39 - 3 mil 1.10" - 1.60"...
Page 41: Ds3578-Er Decode Ranges
Scanning 2 - 9 DS3578-ER Decode Ranges DS3578-ER Depth of Field Table 2-5 Label Density DS3578-ER Paper Label English Metric Code 39 - 7.5 mil 8.50” - 34” 21.59 - 86.36 cm Code 39 - 10 mil 8” - 41.50”...
Page 42 2 - 10 DS3578 With FIPS Digital Scanner Product Reference Guide...
Page 43: Chapter 3 Maintenance And Technical Specifications
Chapter 3 Maintenance and Technical Specifications Introduction This chapter provides suggested digital scanner maintenance, troubleshooting, technical specifications, and signal descriptions (pinouts). Maintenance Cleaning the scan window is the only maintenance required. A dirty window can affect scanning accuracy. • Do not allow any abrasive material to touch the window. •...
Page 44: Troubleshooting
3 - 2 DS3578 With FIPS Digital Scanner Product Reference Guide Troubleshooting Troubleshooting Table 3-1 Problem Possible Causes Possible Solutions Digital scanner emits low/ Digital scanner is powering Normal when digital scanner battery is inserted. medium/high beep sequence. Nothing happens when scan No power to the digital Check battery.
Page 45 Maintenance and Technical Specifications 3 - 3 Troubleshooting (Continued) Table 3-1 Problem Possible Causes Possible Solutions Digital scanner emits four long Incorrect host interface Ensure that correct host interface cable is used. low beeps after scanning a bar cable is used. code.
Page 46 Charge within the recommended temperature of charging temperature range. 32° to 104° F (0° to 40° C) nominal, 41° to 95° F (5° to 35° C) ideal. NOTE If problems still occur, contact the distributor or Motorola Solutions Support. See page xviii for contact information.
Page 47: Technical Specifications
Maintenance and Technical Specifications 3 - 5 Technical Specifications Technical Specifications - Scanner Table 3-2 Item Description Physical Characteristics Dimensions: Height 7.34 in. (18.65 cm) Width 4.82 in. (12.25 cm) Depth 2.93 in. (7.43 cm) Weight 13.79 oz. (391 grams) Performance Characteristics Roll/Pitch/Yaw SR/HD/DP Configurations: ±360, ±65, ±60...
Page 48 3 - 6 DS3578 With FIPS Digital Scanner Product Reference Guide Technical Specifications - Scanner (Continued) Table 3-2 Item Description IUID Support Supports IUID parsing. The ability to read and separate IUID fields per application requirements Typical Working Distance Decode Ranges on page 2-8 Print Contrast Minimum 25% minimum reflectance differential, measured at 650 nm.
Page 49 Maintenance and Technical Specifications 3 - 7 Technical Specifications - Cradles (Continued) Table 3-3 Description Item STB3508 and FLB3508 STB3578 and FLB3578 Storage Temperature -40° to 158° F (-40° to 70° C) Charging Temperature 32° to 104° F (0° to 40° C) nominal, 41° to 95° F (5° to 35° C) ideal Humidity 5% to 95% (non-condensing) 15 kV air discharge...
Page 50: Scanner Signal Descriptions
3 - 8 DS3578 With FIPS Digital Scanner Product Reference Guide Scanner Signal Descriptions The signal descriptions in Table 3-4 apply to the 10-pin RJ connector on the cradle and are for reference only. Cradle to Host Pin-outs Table 3-4...
Page 51: Chapter 4 Radio Communications
Chapter 4 Radio Communications Introduction This chapter provides information about the modes of operation and features available for wireless communication between digital scanners, cradles and hosts. The chapter also includes the parameters necessary to configure the digital scanner. The digital scanner ships with the settings shown in the Table 4-1 on page 4-2 (also see Appendix A, Standard...
Page 52: Radio Communications Parameter Defaults
4 - 2 DS3578 With FIPS Digital Scanner Product Reference Guide Radio Communications Parameter Defaults Table 4-1 lists the defaults for radio communication parameters. If you wish to change any option, scan the appropriate bar code(s) provided in this chapter.
Page 53: Wireless Beeper Definitions
Radio Communications 4 - 3 Wireless Beeper Definitions When the digital scanner scans the pairing bar code it issues various beep sequences indicating successful or unsuccessful operations. See Table 4-2 for beep sequences that occur during pairing operations. Wireless Beeper Definitions Table 4-2 Beeper Sequence Indication...
Page 54: Radio Communications Host Types
4 - 4 DS3578 With FIPS Digital Scanner Product Reference Guide Radio Communications Host Types To set up the digital scanner for communication with a cradle, or to use standard Bluetooth profiles, scan the appropriate host type bar code below.
Page 55 Radio Communications 4 - 5 Radio Communications Host Types (continued) *Cradle Host Serial Port Profile (Master) Serial Port Profile (Slave) Bluetooth Keyboard Emulation (HID Slave)
Page 56: Bluetooth Technology Profile Support
4 - 6 DS3578 With FIPS Digital Scanner Product Reference Guide Bluetooth Technology Profile Support With Bluetooth Technology Profile Support, the cradle is not required for wireless communication. The digital scanner communicates directly to the host using Bluetooth technology. The digital scanner supports the standard Bluetooth Serial Port Profile (SPP) and HID Profiles which enable the digital scanner to communicate with other Bluetooth devices that support these profiles.
Page 57: Bluetooth Friendly Name
Select General Discoverable Mode when initiating connection from a PC. • Select Limited Discoverable Mode when initiating connection from a mobile device (e.g., Motorola Q), and the device does not appear in General Discoverable Mode. Note that it can take longer to discover the device in this mode.
Page 58: Hid Host Parameters
4 - 8 DS3578 With FIPS Digital Scanner Product Reference Guide HID Host Parameters The digital scanner supports keyboard emulation over the Bluetooth HID profile. In this mode the digital scanner can interact with Bluetooth enabled hosts supporting the HID profile as a Bluetooth keyboard. Scanned data is transmitted to the host as keystrokes.
Page 59 Radio Communications 4 - 9 HID Country Keyboard Types (Country Codes) (continued) Italian Windows Swedish Windows UK English Windows Japanese Windows French Canadian Windows 2000/XP Portuguese/Brazilian Windows...
Page 60: Hid Keyboard Keystroke Delay
4 - 10 DS3578 With FIPS Digital Scanner Product Reference Guide HID Keyboard Keystroke Delay This parameter sets the delay, in milliseconds, between emulated keystrokes. Scan a bar code below to increase the delay when the HID host requires a slower transmission of data.
Page 61: Hid Ignore Unknown Characters
Radio Communications 4 - 11 HID Ignore Unknown Characters Unknown characters are characters the host does not recognize. When Send Bar Codes With Unknown Characters is scanned, all bar code data is sent except for unknown characters, and no error beeps sound. When Do Not Send Bar Codes With Unknown Characters is scanned, bar codes containing at least one unknown character are not sent to the host, and an error beep sounds.
Page 62: Hid Keyboard Fn1 Substitution
4 - 12 DS3578 With FIPS Digital Scanner Product Reference Guide HID Keyboard FN1 Substitution When enabled, this parameter allows replacement of any FN1 character in an EAN128 bar code with a Key Category and value chosen by the user. See...
Page 63: Simulated Caps Lock
Radio Communications 4 - 13 Simulated Caps Lock When enabled, the digital scanner inverts upper and lower case characters on the digital scanner bar code as if the Caps Lock state is enabled on the keyboard. This inversion is done regardless of the current state of the keyboard Caps Lock state.
Page 64: Auto-Reconnect Feature
4 - 14 DS3578 With FIPS Digital Scanner Product Reference Guide Auto-reconnect Feature When in SPP Master or Cradle Host mode, the digital scanner automatically tries to reconnect to a remote device when a disconnection occurs that is due to the radio losing communication. This can happen if the digital scanner goes out of range with the remote device, or if the remote device powers down.
Page 65: Reconnect Attempt Interval
Radio Communications 4 - 15 Reconnect Attempt Interval When a digital scanner disconnects as it goes out of range, it immediately attempts to reconnect for the default time interval of 30 seconds. This time interval can be changed to one of the following options: •...
Page 66: Auto-Reconnect In Bluetooth Keyboard Emulation (Hid Slave) Mode
4 - 16 DS3578 With FIPS Digital Scanner Product Reference Guide Auto-reconnect in Bluetooth Keyboard Emulation (HID Slave) Mode In Bluetooth Keyboard Emulation (HID Slave) mode, select a re-connect option for when the digital scanner loses its connection with a remote device: •...
Page 67: Out Of Range Indicator
Radio Communications 4 - 17 Out of Range Indicator An out of range indicator can be set by scanning Enable Beep on Reconnect Attempt on page 4-14 and extending the time using the Reconnect Attempt Interval on page 4-15. For example, with Beep on Reconnect Attempt disabled while the digital scanner loses radio connection when it is taken out of range, the digital scanner attempts to reconnect silently during the time interval set by scanning a Reconnect Attempt Interval.
Page 68: Scanner(S) To Cradle Support
4 - 18 DS3578 With FIPS Digital Scanner Product Reference Guide Scanner(s) to Cradle Support NOTE Customers who purchased STB3578 and/or FLB3578 cradles prior to February 1, 2010 (manufacturing date) and plan to use them in radio communication mode with the DS3578 must download 123Scan (see Chapter 11, 123Scan2) and update the digital scanner to the latest firmware revision.
Page 69: Parameter Broadcast (Cradle Host Only)
Radio Communications 4 - 19 Parameter Broadcast (Cradle Host Only) When in multipoint-to-point mode, enable Parameter Broadcast to broadcast all parameter bar codes scanned to all other digital scanners in the piconet. If disabled, parameter bar codes are processed by the individual digital scanner only, and the digital scanner ignores parameters broadcast from other digital scanners or from the cradle.
Page 70 4 - 20 DS3578 With FIPS Digital Scanner Product Reference Guide Pairing Modes When operating with the cradle, two modes of pairing are supported: • Locked Pairing Mode - When a cradle is paired (connected) to the digital scanner (or to three digital scanners...
Page 71 Unpair the digital scanner from the cradle or PC/host to make the cradle available for pairing with another digital scanner. Scan the bar code below to disconnect the digital scanner from its cradle/PC host. An unpairing bar code is also included in the DS3578 Quick Start Guide. Unpairing...
Page 72: Pairing Bar Code Format
4 - 22 DS3578 With FIPS Digital Scanner Product Reference Guide Pairing Bar Code Format When the digital scanner is configured as an SPP Master, you must create a pairing bar code for the remote Bluetooth device to which the digital scanner can connect. You must know the Bluetooth address of the remote device.
Page 73: Fips Mode
Parameter # F1h E0h The Federal Information Processing Standard (FIPS) 140-2 is a U.S. government computer security standard used to accredit cryptographic modules. FIPS enabled DS3578 digital scanners and cradles offer this secure mode of operation. To enable the FIPS mode of operation (enabled by default), scan the Enable FIPS bar code. The digital scanner will attempt to establish a secure session with the cradle to which it is connected.
Page 74: Connection Maintenance Interval
4 - 24 DS3578 With FIPS Digital Scanner Product Reference Guide Connection Maintenance Interval NOTE The Connection Maintenance Interval only applies in locked pairing mode (see page 4-20). When a scanner disconnects from a cradle due to a Link Supervision Timeout, the digital scanner immediately attempts to reconnect to the cradle for 30 seconds.
Page 75 Radio Communications 4 - 25 Considerations The system administrator determines the Connection Maintenance Interval. A shorter interval allows new users to gain access to abandoned connections more quickly, but causes problems if users leave the work area for extended periods. A longer interval allows existing users to leave the work area for longer periods of time, but ties up the system for new users.
Page 76 4 - 26 DS3578 With FIPS Digital Scanner Product Reference Guide Connection Maintenance Interval (continued) Set Interval to 4 Hours Set Interval to 8 Hours Set Interval to 24 Hours Set Interval to Forever...
Page 77: Bluetooth Security
Radio Communications 4 - 27 Bluetooth Security The digital scanner supports Bluetooth Authentication and Encryption. Authentication can be requested by either the remote device or the digital scanner. When Authentication is requested, the digital scanner uses its programmed PIN code to generate a link key. The digital scanner stores this link key upon pairing, so you do not have to re-enter the PIN code when moving in and out of range, switching profiles, or switching between devices (e.g., between the cradle and the application).
Page 78: Pin Code
4 - 28 DS3578 With FIPS Digital Scanner Product Reference Guide PIN Code To set the PIN code (e.g., password) on the digital scanner, scan the bar code below followed by five alphanumeric programming bar codes from Appendix D, Alphanumeric Bar Codes.
Page 79: Encryption
Radio Communications 4 - 29 Encryption NOTE Authentication must be performed before Encryption can take effect. To set up the digital scanner for enabling Encryption, scan Enable Encryption. To prevent the digital scanner from enabling Encryption, scan Disable Encryption. When enabled, the radio encrypts data Enable Encryption *Disable Encryption...
Page 80 4 - 30 DS3578 With FIPS Digital Scanner Product Reference Guide...
Page 81: Chapter 5 User Preferences
Chapter 5 User Preferences Introduction This chapter describes each user preference feature and provides the programming bar codes for selecting these features for the digital scanner. The digital scanner ships with the settings shown in the Configure the digital scanner using the 123Scan2 configuration program (see 123Scan2 on page 11-1).
Page 82: Scanning Sequence Examples
5 - 2 DS3578 With FIPS Digital Scanner Product Reference Guide Scanning Sequence Examples In most cases scanning one bar code sets the parameter value. For example, to set the beeper tone to high, scan the High Frequency (beeper tone) bar code listed under Beeper Tone on page 5-7.
Page 83 User Preferences 5 - 3 User Preferences Parameter Defaults (Continued) Table 5-1 Parameter Page Parameter Default Number Number Timeout to Low Power Mode from Auto Aim F1h D9h 15 Sec 5-16 Picklist Mode F0h 92h Disabled Always 5-17 DPM Scanning F1h 09h Enable 5-18...
Page 84: User Preferences
5 - 4 DS3578 With FIPS Digital Scanner Product Reference Guide User Preferences Default Parameters The scanner can be reset to two types of defaults: factory defaults or custom defaults. Scan the appropriate bar code below to reset the scanner to its default settings and/or set the scanner’s current settings as the custom default.
Page 85: Parameter Bar Code Scanning
User Preferences 5 - 5 Parameter Bar Code Scanning Parameter # ECh To disable the decoding of parameter bar codes, including the Set Defaults parameter bar codes, scan the Disable Parameter Scanning bar code below. To enable decoding of parameter bar codes, scan Enable Parameter Scanning.
Page 86: Suppress Power Up Beeps
5 - 6 DS3578 With FIPS Digital Scanner Product Reference Guide Suppress Power Up Beeps Parameter # F1h D1h Scan a bar code below to select whether or not to suppress digital scanner beeps upon power up Do Not Suppress Power Up Beeps...
Page 87: Beeper Tone
User Preferences 5 - 7 Beeper Tone Parameter # 91h To select a decode beep frequency (tone), scan one of the following bar codes. (03h) Low Tone (02h) Medium Tone (01h) High Tone (00h) Medium to High Tone (2-tone) (04h)
Page 88: Beeper Volume
5 - 8 DS3578 With FIPS Digital Scanner Product Reference Guide Beeper Volume Parameter # 8Ch To select a beeper volume, scan the Low Volume, Medium Volume, or High Volume bar code. Low Volume (02h) Medium Volume (01h) High Volume...
Page 89: Beeper Duration
User Preferences 5 - 9 Beeper Duration Parameter # F1h 74h To select the duration for the beeper, scan one of the following bar codes. Short (00h) Medium (01h) Long (02h) Beep on Insertion Parameter # F0h 20h When a digital scanner is inserted into a cradle and detects power, it emits a short low beep. This feature is enabled by default.
Page 90: Decode Pager Motor
5 - 10 DS3578 With FIPS Digital Scanner Product Reference Guide Decode Pager Motor Parameter # F1h 65h The scanner includes a pager motor which, when enabled, vibrates the scanner for a period of time when a successful decode occurs.
Page 91 User Preferences 5 - 11 Decode Pager Motor Duration (continued) 250 msec 300 msec 400 msec *500 msec 600 msec 750 msec...
Page 92: Trigger Mode
5 - 12 DS3578 With FIPS Digital Scanner Product Reference Guide Trigger Mode Parameter # 8Ah Select one of the following trigger modes for the digital scanner. • - Upon trigger pull, an aiming dot appears for a programmable duration of time. After this Level (Standard) time, the aiming dot changes to a standard laser scanning beam for a full decode session.
Page 93: Batch Mode
User Preferences 5 - 13 Batch Mode Parameter # F1h 20h The digital scanner supports three versions of batch mode. When the digital scanner is configured for any of the batch modes, it attempts to store bar code data (not parameter bar codes) until transmission is initialized, or the maximum number of bar codes are stored.
Page 94 5 - 14 DS3578 With FIPS Digital Scanner Product Reference Guide Batch Mode (continued) *Normal (00h) Out of Range Batch Mode (01h) Standard Batch Mode (02h) Cradle Contact Batch Mode (03h) Enter Batch Mode Send Batch Data...
Page 95: Time Delay To Reduced Power Mode
User Preferences 5 - 15 Time Delay to Reduced Power Mode Parameter # 92h This parameter sets the time it takes the digital scanner to enter reduced power mode after any scanning activity. Scan the appropriate bar code below to set the time. 500 msecs 100 msecs 1 sec...
Page 96: Timeout To Low Power Mode From Auto Aim
5 - 16 DS3578 With FIPS Digital Scanner Product Reference Guide Timeout to Low Power Mode from Auto Aim Parameter # F1h D9h This parameter sets the time the digital scanner remains in auto aim before entering low power mode. See...
Page 97: Picklist Mode
(00h) Enabled in Hand-Held Mode (01h) NOTE The DS3578-DP (non-FIPS; DS3578-DP20005WR) Does Not support Picklist Mode. However, the DS3578-DP with FIPS (DS3578-DP2F005WR) Does support Picklist Mode NOTE Picklist Mode temporarily over-rides the Disable Decode Aiming Pattern parameter. The Decode Aiming Pattern can not be Disabled when the following parameter settings are selected: •...
Page 98: Dpm Scanning
The DS3578-DP (DPM) reader scans these types of symbols. NOTE When the DS3578-DP digital scanner is DPM enabled, the digital scanner reads all symbols including DPM, 1D, PDF417, etc. If you do not require DPM reading, scan Disable DPM Scanning to ensure optimum scanner performance.
Page 99: Mobile Phone/Display Mode
User Preferences 5 - 19 Mobile Phone/Display Mode Parameter # F1h CCh Select to improve bar code reading performance off mobile phones and Enable Mobile Phone/Display Mode electronic displays. Disable Mobile Phone/Display Mode (00h) Enable Mobile Phone/Display Mode (01h)
Page 100: Pdf Prioritization
5 - 20 DS3578 With FIPS Digital Scanner Product Reference Guide PDF Prioritization Parameter # F1h CFh Enable this feature to delay decoding a 1D bar code (Code 128) by the value specified in PDF Prioritization Timeout. During that time the digital scanner attempts to decode a PDF417 symbol (e.g., on a US driver's license), and if successful, reports this only.
Page 101: Continuous Bar Code Read
Continuous Bar Code Read Parameter # F1h 89h Enable this to report every bar code while the trigger is pressed. NOTE Motorola strongly recommends enabling Picklist Mode on page 5-17 with this feature. Disabling Picklist Mode can cause accidental decodes when more than one bar code is in the imaging engine's field of view.
Page 102: Decode Session Timeout
5 - 22 DS3578 With FIPS Digital Scanner Product Reference Guide Decode Session Timeout Parameter # 88h This parameter sets the maximum time decode processing continues during a scan attempt. It is programmable in 0.1 second increments from 0.5 to 9.9 seconds. The default timeout is 9.9 seconds.
Page 103: Fuzzy 1D Processing
User Preferences 5 - 23 Fuzzy 1D Processing Parameter # F1h 02h This option is enabled by default to optimize decode performance on 1D bar codes, including damaged and poor quality symbols. Disable this only if you experience time delays when decoding 2D bar codes, or in detecting a no decode.
Page 104: Decode Mirror Images (Data Matrix Only)
5 - 24 DS3578 With FIPS Digital Scanner Product Reference Guide Decode Mirror Images (Data Matrix Only) Parameter # F1h 19h Select an option for decoding mirror image Data Matrix bar codes: • Always - decode only Data Matrix bar codes that are mirror images •...
Page 105: Decode Aiming Pattern
Decode Aiming Pattern is disabled. NOTE Picklist Mode temporarily over-rides the Disable Decode Aiming Pattern parameter. The Decode Aiming Pattern can not be Disabled (using the DS3578-SR configuration) when the Picklist Mode is set to Enable.
Page 106: Decoding Illumination
5 - 26 DS3578 With FIPS Digital Scanner Product Reference Guide Decoding Illumination Parameter # F0h 2Ah Selecting Enable Decoding Illumination causes the digital scanner to flash illumination to aid decoding. Select Disable Decoding Illumination to prevent the digital scanner from using decoding illumination.
Page 107: Torch Mode (Ds3578-Er Only)
User Preferences 5 - 27 Torch Mode (DS3578-ER Only) Parameter # F1h EBh Selecting Enable Torch Mode causes the digital scanner to automatically provide brighter illumination longer to optimize decode accuracy when scanning at an extended decode range (far distance of 5 feet or greater) using the DS3578-ER digital scanner.
Page 108: Smart Led Mode (Ds3578-Er Only)
Smart LED Mode (DS3578-ER Only) Parameter # F1h ECh Selecting Enable Smart LED Mode optimizes decode accuracy when scanning near using the DS3578-ER digital scanner. Select Disable Smart LED Mode to prevent the digital scanner from using Smart LED Mode.
Page 109: Focus Mode
Focus Mode Parameter # F0h A6h Select the Focus Mode to control the working range of the DS3578-ER digital scanner. • Select Far Only focus to optimize the digital scanner to read at its far position. Use this mode when scanning large bar codes in order to fit these bar codes in the digital scanner’s field of view.
Page 110: Multicode Mode (Ds3578-Sr / Ds3578-Hd)
5 - 30 DS3578 With FIPS Digital Scanner Product Reference Guide Multicode Mode (DS3578-SR / DS3578-HD) Parameter # F1h A5h Enable this parameter to allow multiple bar codes to decode upon one trigger event based on the programmed multicode expression. The digital scanner reports a successful decode and provides user indication only if it decodes all bar codes indicated by the multicode expression, otherwise the decode fails.
Page 111: Multicode Expression (Ds3578-Sr / Ds3578-Hd)
Multicode Mode (DS3578-SR / DS3578-HD) (grid method). The default is 1, which indicates any bar code. NOTE The DS3578-DP and DS3578-ER configurations do not support this feature. To set the multicode expression: Scan the bar code below. Scan bar codes from the alphanumeric keyboard in...
Page 112 5 - 32 DS3578 With FIPS Digital Scanner Product Reference Guide • . An element can specify a specific bar code symbology to find and decode somewhere in the By Code Type field of view. A code type element is constructed as:...
Page 113 User Preferences 5 - 33 Example 1 To decode one Code 128 bar code anywhere in the image (even when bar codes of other types are in view), as in Figure 5-1, program the expression as follows: The expression in decimal is (formatted for readability): 1 C 2 0 8 ;...
Page 114 5 - 34 DS3578 With FIPS Digital Scanner Product Reference Guide Example 2a To decode a Code128 (Code Type=8) on the top half of the image and a PDF417 (Code Type=15) on the bottom half of the image, as in...
Page 115 User Preferences 5 - 35 100% (0,0) Code 128 Code (100,50) (0,50) PDF417 Code (160,100) 100% Multicode Expression Example 2 Figure 5-2...
Page 116 5 - 36 DS3578 With FIPS Digital Scanner Product Reference Guide Example 3 To decode the set of three bar codes while excluding the center Code 128 bar code, as in Figure 5-3, the expression is: The expression in decimal is (formatted for readability): 3 C 2 0 15 R 4 0 0 50 50 ;...
Page 117: Multicode Mode Concatenation (Ds3578-Sr / Ds3578-Hd)
Disable this to transmit decoded bar codes separately. NOTE When using Multicode Mode Concatenation, disable Transmit Code ID Character on page 5-41 and check digits. NOTE The DS3578-DP and DS3578-ER configurations do not support this feature. Enable Multicode Mode Concatenation (01h) Disable Multicode Mode Concatenation (00h)
Page 118: Multicode Concatenation Symbology (Ds3578-Sr / Ds3578-Hd)
5 - 38 DS3578 With FIPS Digital Scanner Product Reference Guide Multicode Concatenation Symbology (DS3578-SR / DS3578-HD) Parameter # F1h D2h Use this parameter to specify how to transmit the concatenated bar codes decoded as specified by the Multicode Expression (DS3578-SR / DS3578-HD).
Page 119: Multicode Troubleshooting
• If the digital scanner appears to decode any single bar code instead of the intended multiple bar codes, ensure you enabled Multicode Mode (DS3578-SR / DS3578-HD) on page 5-30. Programming the multicode expression does not enable multicode mode. •...
Page 120 5 - 40 DS3578 With FIPS Digital Scanner Product Reference Guide Examples of Simple Multicode Expressions The simplest multicode expression is: • One bar code of any type, anywhere in the image. • To program this use: [MultiCode-Expression] 01 ; [End Of Message] Another simple multicode expression is: •...
Page 121: Miscellaneous Scanner Parameters
User Preferences 5 - 41 Miscellaneous Scanner Parameters Transmit Code ID Character Parameter # 2Dh A Code ID character identifies the code type of a scanned bar code. This is useful when decoding more than one code type. In addition to any single character prefix already selected, the Code ID character is inserted between the prefix and the decoded symbol.
Page 122: Prefix/Suffix Values
5 - 42 DS3578 With FIPS Digital Scanner Product Reference Guide Prefix/Suffix Values Key Category Parameter # P = 63h, S1 = 62h, S2 = 64h Decimal Value Parameter # P = 69h, S1 = 68h, S2 = 6Ah You can append a prefix and/or one or two suffixes to scan data for use in data editing. To set a value for a prefix or suffix, scan a four-digit number (i.e., four bar codes from...
Page 123: Scan Data Transmission Format
User Preferences 5 - 43 Scan Data Transmission Format Parameter # EBh To change the scan data format, scan one of the following eight bar codes corresponding to the desired format. NOTE If using this parameter do not use ADF rules to set the prefix/suffix To set values for the prefix and/or suffix, see Prefix/Suffix Values on page 5-42.
Page 124: Fn1 Substitution Values
5 - 44 DS3578 With FIPS Digital Scanner Product Reference Guide Scan Data Transmission Format (continued) <PREFIX> <DATA> <SUFFIX 1> (05h) <PREFIX> <DATA> <SUFFIX 2> (06h) <PREFIX> <DATA> <SUFFIX 1> <SUFFIX 2> (07h) FN1 Substitution Values Key Category Parameter # 67h Decimal Value Parameter # 6Dh The Wedge and USB HID Keyboard hosts support a FN1 Substitution feature.
Page 125: Transmit "No Read" Message
User Preferences 5 - 45 Transmit “No Read” Message Parameter # 5Eh Scan a bar code below to select whether or not to transmit a No Read message. Enable this to transmit the characters NR when a successful decode does not occur before trigger release or the Decode Session Timeout expires.
Page 126: Uid Parsing
5 - 46 DS3578 With FIPS Digital Scanner Product Reference Guide UID Parsing Parameter # F1h E4h NOTE UID parsing is only supported by DP configurations of the digital scanner. NOTE UID constructs are compliant with the US Department of Defense MIL - STD - 130N.
Page 127 User Preferences 5 - 47 UID Parsing Output When a UID successfully parses the fields shown in Table 5-2 are created. Each field is separated by a comma. If data is missing from a field in the UID, a lone comma fills the field. NOTE When a UID successfully parses, a parsed UID bar code type transmits to the host.
Page 128 5 - 48 DS3578 With FIPS Digital Scanner Product Reference Guide UID Error Mode Options Parameter # F1h E6h • UID Error Beep (default): Scan UID Error Beep to program the digital scanner not to parse the data contained in the UID when the UID is not formatted correctly. An error tone sounds and no data transmits to the host.
Page 129 User Preferences 5 - 49 Sample ADF Rule for UID To transmit only the concatenated UID field of the parsed UID, scan the bar codes below, in order. Begin New Rule Criterion: Parsed UID Send Data Up to Character (Comma) Save Rule...
Page 130 5 - 50 DS3578 With FIPS Digital Scanner Product Reference Guide UID Sample Bar Codes 05 Format WS51-004041,UID2,,041,WS51-004,,,[)> rs 05 gs 01WS51-004 gs 21041 rs eot Sample 05 Formatted Data Table 5-4 Field Description 1 - Concatenated UID WS51-004041 2 - Construct type (UID1 or UID2)
Page 131 User Preferences 5 - 51 12 Format D12345WS51-004041,UID2,12345,041,WS51-004,,,[)> rs 12 gs MFR 12345 gs PNO WS51-004 gs SEQ 041 rs eot Sample 12 Formatted Data Table 5-6 Field Description 1 - Concatenated UID D12345WS51-004041 2 - Construct type (UID1 or UID2) UID2 3 - Enterprise ID 12345...
Page 132 5 - 52 DS3578 With FIPS Digital Scanner Product Reference Guide...
Page 133: Chapter 6 Imaging Preferences
Chapter 6 Imaging Preferences Introduction NOTE The DS3578-ER configuration does not support imaging preferences parameters. You can program the digital scanner to perform various functions, or activate different features. This chapter describes imaging preference features and provides programming bar codes for selecting these features.
Page 134: Scanning Sequence Examples
6 - 2 DS3578 With FIPS Digital Scanner Product Reference Guide Scanning Sequence Examples In most cases scanning one bar code sets the parameter value. For example, to disable image capture illumination, scan the Disable Image Capture Illumination bar code under Image Capture Illumination on page 6-5.
Page 135 Imaging Preferences 6 - 3 Imaging Preferences Parameter Defaults (Continued) Table 6-1 Parameter Page Parameter Default Number Number JPEG Quality and Size Value F0h 31h 6-12 Image Enhancement F1h 34h Off (0) 6-13 Image File Format Selection F0h 30h JPEG 6-14 Image Rotation F1h 99h...
Page 136: Imaging Preferences
6 - 4 DS3578 With FIPS Digital Scanner Product Reference Guide Imaging Preferences The parameters in this chapter control image capture characteristics. Image capture occurs in all modes of operation, including decode and snapshot. NOTE Imaging preference parameters are for use with the STB/FLB3578 With FIPS Cradles only.
Page 137: Image Capture Illumination
Imaging Preferences 6 - 5 Image Capture Illumination Parameter # F0h 69h Selecting Enable Image Capture Illumination causes illumination to turn on during every image capture. Disable illumination to prevent the digital scanner from using illumination. Enabling illumination usually results in superior images. The effectiveness of illumination decreases as the distance to the target increases.
Page 138: Gain/Exposure Priority For Snapshot Mode
6 - 6 DS3578 With FIPS Digital Scanner Product Reference Guide Gain/Exposure Priority for Snapshot Mode Parameter # F1h 32h This parameter alters the digital scanner’s gain exposure priority when it acquires an image in Snapshot Mode in auto exposure mode.
Page 139: Snapshot Mode Timeout
Imaging Preferences 6 - 7 Snapshot Mode Timeout Parameter # F0h 43h This parameter sets the amount of time the digital scanner remains in Snapshot Mode. The digital scanner exits Snapshot Mode when you pull the trigger, or when the Snapshot Mode Timeout elapses. To set this timeout value, scan the bar code below followed by a bar code from Appendix E, Numeric Bar Codes.
Page 140: Image Cropping
6 - 8 DS3578 With FIPS Digital Scanner Product Reference Guide Image Cropping Parameter # F0h 2Dh This parameter crops a captured image. Select Disable Image Cropping to present the full 752 x 480 pixels. Select Enable Image Cropping to crop the image to the pixel addresses set in Crop to Pixel Addresses on page 6-9.
Page 141: Crop To Pixel Addresses
Imaging Preferences 6 - 9 Crop to Pixel Addresses Parameter # F4h F0h 3Bh (Top) Parameter # F4h F0h 3Ch (Left) Parameter # F4h F0h 3Dh (Bottom) Parameter # F4h F0h 3Eh (Right) If you selected Enable Image Cropping, set the pixel addresses from (0,0) to (751,479) to crop to. Columns are numbered from 0 to 751, rows from 0 to 479.
Page 142: Image Size (Number Of Pixels)
6 - 10 DS3578 With FIPS Digital Scanner Product Reference Guide Image Size (Number of Pixels) Parameter # F0h 2Eh This option alters image resolution before compression. Multiple pixels are combined to one pixel, resulting in a smaller image containing the original content with reduced resolution.
Page 143: Image Brightness (Target White)
Imaging Preferences 6 - 11 Image Brightness (Target White) Parameter # F0h 86h Type: Byte Range: 1 - 240 This parameter sets the Target White value used in Snapshot and Video Viewfinder mode when using auto exposure. White and black are defined as 240 decimal and 1, respectively. Setting the value to the factory default of 180 sets the white level of the image to ~180.
Page 144: Jpeg Target File Size
6 - 12 DS3578 With FIPS Digital Scanner Product Reference Guide JPEG Target File Size Parameter # F4h F1h 31h Type: Word Range: 5-350 This parameter defines the target JPEG file size in terms 1 Kilobytes (1024 bytes). The default value is 160 kB which represents 160 Kilobytes.
Page 145: Image Enhancement
Imaging Preferences 6 - 13 Image Enhancement Parameter # F1h 34h This parameter configures the digital scanner's Image Enhance feature. This feature uses a combination of edge sharpening and contrast enhancement to produce an image that is visually pleasing. The levels of image enhancement are: •...
Page 146: Image File Format Selector
6 - 14 DS3578 With FIPS Digital Scanner Product Reference Guide Image File Format Selector Parameter # F0h 30h Select an image format appropriate for the system (BMP, TIFF, or JPEG). The digital scanner stores captured images in the selected format.
Page 147: Image Rotation
Imaging Preferences 6 - 15 Image Rotation Parameter # F1h 99h This parameter controls the rotation of the image by 0, 90,180, or 270 degrees. *Rotate 0 (00h) Rotate 90 (01h) Rotate 180 (02h) Rotate 270 (03h)
Page 148: Bits Per Pixel
6 - 16 DS3578 With FIPS Digital Scanner Product Reference Guide Bits Per Pixel Parameter # F0h 2Fh Select the number of significant bits per pixel (BPP) to use when capturing an image. Select 1 BPP for a black and white image, 4 BPP to assign 1 of 16 levels of grey to each pixel, or 8 BPP to assign 1 of 256 levels of grey to each pixel.
Page 149: Signature Capture
Imaging Preferences 6 - 17 Signature Capture Parameter # 5Dh A signature capture bar code is a special-purpose symbology which delineates a signature capture area in a document with a machine-readable format. The recognition pattern is variable so it can optionally provide an index to various signatures.
Page 150: Signature Capture File Format Selector
6 - 18 DS3578 With FIPS Digital Scanner Product Reference Guide Signature Capture File Format Selector Parameter # F0h 39h Select a signature file format appropriate for the system (BMP, TIFF, or JPEG). The digital scanner stores captured signatures in the selected format.
Page 151: Signature Capture Bits Per Pixel
Imaging Preferences 6 - 19 Signature Capture Bits Per Pixel Parameter # F0h 3Ah Select the number of significant bits per pixel (BPP) to use when capturing a signature. Select 1 BPP for a black and white image, 4 BPP to assign 1 of 16 levels of grey to each pixel, or 8 BPP to assign 1 of 256 levels of grey to each pixel.
Page 152: Signature Capture Width
6 - 20 DS3578 With FIPS Digital Scanner Product Reference Guide Signature Capture Width Parameter # F4h F0h 6Eh The aspect ratio of the Signature Capture Width and Signature Capture Height parameters must match that of the signature capture area. For example, a 4 x 1 inch signature capture area would require a 4 to 1 aspect ratio of width to height.
Page 153: Chapter 7 Keyboard Wedge Interface
Chapter 7 Keyboard Wedge Interface Introduction This chapter provides instructions for programming the digital scanner for keyboard wedge host interface, used to connect the digital scanner between the keyboard and host computer. The digital scanner translates the bar code data into keystrokes, and transmits the information to the host computer via the cradle interface. The host computer accepts the keystrokes as if they originated from the keyboard.
Page 154: Connecting A Keyboard Wedge Interface
7 - 2 DS3578 With FIPS Digital Scanner Product Reference Guide Connecting a Keyboard Wedge Interface Male DIN Host Connector Y-cable Keyboard Female DIN Keyboard Connector Connector Keyboard Wedge Interface Connection with Y-cable Figure 7-1 To connect the keyboard wedge interface Y-cable: Turn off the host and unplug the keyboard connector.
Page 155: Keyboard Wedge Default Parameters
Keyboard Wedge Interface 7 - 3 Keyboard Wedge Default Parameters Table 7-1 lists the defaults for keyboard wedge host parameters. To change any option, scan the appropriate bar code(s) provided in this chapter. NOTE See Appendix A, Standard Default Parameters for all user preference, host, symbology, and miscellaneous default parameters.
Page 156: Keyboard Wedge Host Parameters
7 - 4 DS3578 With FIPS Digital Scanner Product Reference Guide Keyboard Wedge Host Parameters Keyboard Wedge Host Types Select the keyboard wedge host by scanning one of the following bar codes. *IBM PC/AT & IBM PC Compatibles IBM AT Notebook...
Page 157: Keyboard Wedge Country Types (Country Codes)
Keyboard Wedge Interface 7 - 5 Keyboard Wedge Country Types (Country Codes) Scan the bar code corresponding to the keyboard type. If the particular keyboard type is not listed, see Alternate Numeric Keypad Emulation on page 7-8. North American German Windows French Windows French Canadian Windows 95/98 French Canadian Windows XP/2000...
Page 158 7 - 6 DS3578 With FIPS Digital Scanner Product Reference Guide Keyboard Wedge Country Types (Country Codes) (continued) Spanish Windows Italian Windows Swedish Windows UK English Windows Japanese Windows Brazilian-Portuguese Windows...
Page 159: Ignore Unknown Characters
Keyboard Wedge Interface 7 - 7 Ignore Unknown Characters Unknown characters are characters the host does not recognize. When Send Bar Codes With Unknown Characters is selected, all bar code data is sent except for unknown characters, and the digital scanner emits no error beeps.
Page 160: Intra-Keystroke Delay
7 - 8 DS3578 With FIPS Digital Scanner Product Reference Guide Intra-Keystroke Delay Enable Intra-Keystroke Delay to insert an additional delay between each emulated key press and release. This also sets the Keystroke Delay parameter to a minimum of 5 msec.
Page 161: Caps Lock On
Keyboard Wedge Interface 7 - 9 Caps Lock On When enabled, the digital scanner emulates keystrokes as if the Caps Lock key is always pressed. Enable Caps Lock On *Disable Caps Lock On Caps Lock Override When enabled, on AT or AT Notebook hosts, the keyboard ignores the state of the Caps Lock key and matches the case (upper or lower) of the sent character.
Page 162: Convert Wedge Data
7 - 10 DS3578 With FIPS Digital Scanner Product Reference Guide Convert Wedge Data When enabled, the digital scanner converts all bar code data to the selected case. Convert Wedge Data to Upper Case Convert Wedge Data to Lower Case...
Page 163: Fn1 Substitution
Keyboard Wedge Interface 7 - 11 FN1 Substitution When enabled, this parameter replaces any FN1 character in an EAN128 bar code with a keystroke chosen by the user. See FN1 Substitution Values on page 5-44. Enable FN1 Substitution *Disable FN1 Substitution Send Make and Break When enabled, the scan codes for releasing a key are not sent.
Page 164: Keyboard Maps
7 - 12 DS3578 With FIPS Digital Scanner Product Reference Guide Keyboard Maps The following keyboard maps are provided for prefix/suffix keystroke parameters. To program the prefix/suffix values, see the bar codes on page 5-42. 7006 7014 5001 5002 5003...
Page 165: Ascii Character Set
Keyboard Wedge Interface 7 - 13 ASCII Character Set NOTE Code 39 Full ASCII interprets the bar code special character ($ + % /) preceding a Code 39 character and assigns an ASCII character value to the pair. For example, when Code 39 Full ASCII is enabled and a +B is scanned, it is interpreted as b, %J as ?, and %V as @.
Page 166 7 - 14 DS3578 With FIPS Digital Scanner Product Reference Guide Keyboard Wedge ASCII Character Set (Continued) Table 7-2 Full ASCII Code 39 ASCII Value Keystroke Encode Character 1021 CTRL U 1022 CTRL V 1023 CTRL W 1024 CTRL X...
Page 167 Keyboard Wedge Interface 7 - 15 Keyboard Wedge ASCII Character Set (Continued) Table 7-2 Full ASCII Code 39 ASCII Value Keystroke Encode Character 1048 1049 1050 1051 1052 1053 1054 1055 1056 1057 1058 1059 1060 < 1061 1062 > 1063 1064 1065...
Page 168 7 - 16 DS3578 With FIPS Digital Scanner Product Reference Guide Keyboard Wedge ASCII Character Set (Continued) Table 7-2 Full ASCII Code 39 ASCII Value Keystroke Encode Character 1075 1076 1077 1078 1079 1080 1081 1082 1083 1084 1085 1086...
Page 169 Keyboard Wedge Interface 7 - 17 Keyboard Wedge ASCII Character Set (Continued) Table 7-2 Full ASCII Code 39 ASCII Value Keystroke Encode Character 1102 1103 1104 1105 1106 1107 1108 1109 1110 1111 1112 1113 1114 1115 1116 1117 1118 1119 1120 1121...
Page 170 7 - 18 DS3578 With FIPS Digital Scanner Product Reference Guide Keyboard Wedge ALT Key Character Set Table 7-3 ALT Keys Keystroke 2065 ALT A 2066 ALT B 2067 ALT C 2068 ALT D 2069 ALT E 2070 ALT F...
Page 171 Keyboard Wedge Interface 7 - 19 Keyboard Wedge GUI Key Character Set Table 7-4 GUI Keys Keystrokes 3000 Right Control Key 3048 GUI 0 3049 GUI 1 3050 GUI 2 3051 GUI 3 3052 GUI 4 3053 GUI 5 3054 GUI 6 3055 GUI 7...
Page 172 7 - 20 DS3578 With FIPS Digital Scanner Product Reference Guide Keyboard Wedge GUI Key Character Set (Continued) Table 7-4 GUI Keys Keystrokes 3084 GUI T 3085 GUI U 3086 GUI V 3087 GUI W 3088 GUI X 3089 GUI Y...
Page 173 Keyboard Wedge Interface 7 - 21 Keyboard Wedge F Key Character Set (Continued) Table 7-5 F Keys Keystroke 5021 5022 5023 5024 Keyboard Wedge Numeric Keypad Character Set Table 7-6 Numeric Keypad Keystroke 6042 6043 6044 undefined 6045 6046 6047 6048 6049 6050...
Page 174 7 - 22 DS3578 With FIPS Digital Scanner Product Reference Guide Keyboard Wedge Extended Keypad Character Set Table 7-7 Extended Keypad Keystroke 7001 Break 7002 Delete 7003 Pg Up 7004 7005 Pg Dn 7006 Pause 7007 Scroll Lock 7008 Backspace...
Page 175: Chapter 8 Rs-232 Interface
NOTE This digital scanner uses TTL RS-232 signal levels, which interface with most system architectures. For system architectures requiring RS-232C signal levels, Motorola offers different cables providing the TTL to RS-232C conversion. Contact Motorola Support for more information.
Page 176: Connecting An Rs-232 Interface
8 - 2 DS3578 With FIPS Digital Scanner Product Reference Guide Connecting an RS-232 Interface This connection is made directly from the cradle to the host computer. Serial Port Connector to Host Interface cable RS-232 Direct Connection Figure 8-1 NOTE Interface cables vary depending on configuration. The connectors illustrated in...
Page 177: Rs-232 Default Parameters
RS-232 Interface 8 - 3 RS-232 Default Parameters Table 8-1 lists the defaults for RS-232 host parameters. To change any option, scan the appropriate bar code(s) provided in the parameter descriptions section beginning on page 8-4. NOTE See Appendix A, Standard Default Parameters for all user preference, host, symbology, and miscellaneous default parameters.
Page 178: Host Parameters
8 - 4 DS3578 With FIPS Digital Scanner Product Reference Guide RS-232 Host Parameters Various RS-232 host types are set up with their own parameter default settings. Selecting the host type sets the parameter defaults as listed in Table 8-2.
Page 179 RS-232 Interface 8 - 5 RS-232 Host Parameters (continued) Selecting the ICL, Wincor-Nixdorf Mode A, Wincor-Nixdorf Mode B, Olivetti, Omron, OPOS/JPOS, Fujitsu or CUTE host type enables the transmission of code ID characters listed in Table 8-3. These code ID characters are not programmable and are separate from the Transmit Code ID feature.
Page 180: Host Types
8 - 6 DS3578 With FIPS Digital Scanner Product Reference Guide RS-232 Host Types To select an RS-232 host type, scan one of the following bar codes. *Standard RS-232 ICL RS-232 Wincor-Nixdorf RS-232 Mode A Wincor-Nixdorf RS-232 Mode B Olivetti ORS4500...
Page 181: Baud Rate
RS-232 Interface 8 - 7 RS-232 Host Types (continued) OPOS/JPOS Fujitsu RS-232 SITA/CUTE Baud Rate Baud rate is the number of bits of data transmitted per second. Set the digital scanner’s baud rate to match the baud rate setting of the host device. Otherwise, data may not reach the host device or may reach it in distorted form.
Page 182: Parity
8 - 8 DS3578 With FIPS Digital Scanner Product Reference Guide Parity A parity check bit is the most significant bit of each ASCII coded character. Select the parity type according to host device requirements: • Select Odd parity to set the parity bit value to 0 or 1, based on data, to ensure that an odd number of 1 bits are contained in the coded character.
Page 183: Stop Bit Select
RS-232 Interface 8 - 9 Stop Bit Select The stop bit(s) at the end of each transmitted character marks the end of transmission of one character and prepares the receiving device for the next character in the serial data stream. The number of stop bits selected (one or two) depends on the number the receiving terminal is programmed to accommodate.
Page 184: Hardware Handshaking
8 - 10 DS3578 With FIPS Digital Scanner Product Reference Guide Hardware Handshaking The data interface consists of an RS-232 port designed to operate either with or without the hardware handshaking lines, Request to Send (RTS), and Clear to Send (CTS).
Page 185 RS-232 Interface 8 - 11 Hardware Handshaking (continued) None Standard RTS/CTS RTS/CTS Option 1 RTS/CTS Option 2 RTS/CTS Option 3...
Page 186: Software Handshaking
8 - 12 DS3578 With FIPS Digital Scanner Product Reference Guide Software Handshaking This parameter offers control of the data transmission process in addition to, or instead of, that offered by hardware handshaking. If software handshaking and hardware handshaking are both enabled, hardware handshaking takes precedence.
Page 187 RS-232 Interface 8 - 13 Software Handshaking (continued) None ACK/NAK ACK/NAK with ENQ XON/XOFF...
Page 188: Host Serial Response Time-Out
8 - 14 DS3578 With FIPS Digital Scanner Product Reference Guide Host Serial Response Time-out This parameter specifies how long the digital scanner waits for an ACK, NAK, or CTS before determining that a transmission error has occurred. This only applies when in one of the ACK/NAK Software Handshaking modes, or RTS/CTS Hardware Handshaking option.
Page 189: Rts Line State
RS-232 Interface 8 - 15 RTS Line State This parameter sets the idle state of the Serial Host RTS line. Scan a bar code below to select Low RTS or High RTS line state. Host: Low RTS Host: High RTS Beep on <BEL>...
Page 190: Intercharacter Delay
8 - 16 DS3578 With FIPS Digital Scanner Product Reference Guide Intercharacter Delay This parameter specifies the intercharacter delay inserted between character transmissions. Minimum: 0 msec Low: 25 msec Medium: 50 msec High: 75 msec Maximum: 99 msec...
Page 191: Nixdorf Mode A/B And Opos/Jpos Beep/Led Options
RS-232 Interface 8 - 17 Nixdorf Mode A/B and OPOS/JPOS Beep/LED Options When Nixdorf Mode A, Nixdorf Mode B, or OPOS/JPOS is selected, this parameter indicates when the digital scanner should beep and turn on its LED after a decode. NOTE The Beep/LED After CTS Pulse option is not valid when Nixdorf Mode A is selected.
Page 192: Ignore Unknown Characters
8 - 18 DS3578 With FIPS Digital Scanner Product Reference Guide Ignore Unknown Characters Unknown characters are characters the host does not recognize. When Send Bar Codes with Unknown Characters is selected, all bar code data is sent except for unknown characters, and no error beeps sound on the digital scanner.
Page 193 RS-232 Interface 8 - 19 RS-232 Prefix/Suffix Values (Continued) Table 8-4 Prefix/Suffix Full ASCII Code 39 ASCII Character Value Encode Character 1011 1012 1013 CR/ENTER 1014 1015 1016 1017 DC1/XON 1018 1019 DC3/XOFF 1020 1021 1022 1023 1024 1025 1026 1027 1028 1029...
Page 194 8 - 20 DS3578 With FIPS Digital Scanner Product Reference Guide RS-232 Prefix/Suffix Values (Continued) Table 8-4 Prefix/Suffix Full ASCII Code 39 ASCII Character Value Encode Character 1041 1042 1043 1044 1045 1046 1047 1048 1049 1050 1051 1052 1053...
Page 195 RS-232 Interface 8 - 21 RS-232 Prefix/Suffix Values (Continued) Table 8-4 Prefix/Suffix Full ASCII Code 39 ASCII Character Value Encode Character 1071 1072 1073 1074 1075 1076 1077 1078 1079 1080 1081 1082 1083 1084 1085 1086 1087 1088 1089 1090 1091 1092...
Page 196 8 - 22 DS3578 With FIPS Digital Scanner Product Reference Guide RS-232 Prefix/Suffix Values (Continued) Table 8-4 Prefix/Suffix Full ASCII Code 39 ASCII Character Value Encode Character 1101 1102 1103 1104 1105 1106 1107 1108 1109 1110 1111 1112 1113...
Page 197 RS-232 Interface 8 - 23...
Page 198 8 - 24 DS3578 With FIPS Digital Scanner Product Reference Guide...
Page 199: Chapter 9 Usb Interface
Chapter 9 USB Interface Introduction This chapter provides instructions for programming the digital scanner to interface with a USB host. The cradle connects directly to a USB host, or a powered USB hub. The USB host can power the cradle and recharge the digital scanner battery, but this charging method has limitations.
Page 200: Connecting A Usb Interface
9 - 2 DS3578 With FIPS Digital Scanner Product Reference Guide Connecting a USB Interface USB Series A Connector Interface cable USB Connection Figure 9-1 The cradle connects with USB-capable hosts including: • Desktop PCs and notebooks • Apple™ Macintosh •...
Page 201 USB Interface 9 - 3 On first installation when using Windows, the software displays a prompt to select or install the Human Interface Device driver. To install the Human Interface Device driver provided by Windows, click through Next all the choices and click on the last choice.
Page 202: Usb Default Parameters
9 - 4 DS3578 With FIPS Digital Scanner Product Reference Guide USB Default Parameters Table 9-1 lists the defaults for USB host parameters. To change any option, scan the appropriate bar code(s) provided in the parameter descriptions section beginning on page 9-5.
Page 203: Usb Host Parameters
USB Interface 9 - 5 USB Host Parameters USB Device Type Select the desired USB device type. NOTE When changing USB Device Types, the digital scanner disconnects and reconnects as the cradle re-enumerates on the USB bus. *HID Keyboard Emulation IBM Table Top USB IBM Hand-Held USB USB OPOS Handheld...
Page 204 9 - 6 DS3578 With FIPS Digital Scanner Product Reference Guide USB Device Type (continued) COM Port Emulation Symbol Native API (SNAPI) with Imaging Interface Symbol Native API (SNAPI) without Imaging Interface NOTE Symbol Native API (SNAPI) is for use with the STB/FLB578 With FIPS Cradles only.
Page 205: Usb Country Keyboard Types (Country Codes)
USB Interface 9 - 7 USB Country Keyboard Types (Country Codes) Scan the bar code corresponding to the keyboard type. This setting applies only to the USB HID Keyboard Emulation device. NOTE When changing USB Country Keyboard Types, the digital scanner resets and issues the standard startup beep sequences.
Page 206 9 - 8 DS3578 With FIPS Digital Scanner Product Reference Guide USB Country Keyboard Types (Country Codes) (continued) French International Windows Spanish Windows Italian Windows Swedish Windows UK English Windows Japanese Windows (ASCII) Brazilian-Portuguese Windows...
Page 207: Symbol Native Api (Snapi) Status Handshaking
USB Interface 9 - 9 Symbol Native API (SNAPI) Status Handshaking After selecting a SNAPI interface as the USB device type, select whether to enable or disable status handshaking. Enable SNAPI Status Handshaking Disable SNAPI Status Handshaking USB Keystroke Delay This parameter sets the delay, in milliseconds, between emulated keystrokes.
Page 208: Usb Caps Lock Override
9 - 10 DS3578 With FIPS Digital Scanner Product Reference Guide USB Caps Lock Override This option applies only to the HID Keyboard Emulation device. When enabled, the case of the data is preserved regardless of the state of the caps lock key. This setting is always enabled for the Japanese, Windows (ASCII) keyboard type and can not be disabled.
Page 209: Emulate Keypad
USB Interface 9 - 11 Emulate Keypad When enabled, all characters are sent as ASCII sequences over the numeric keypad. For example ASCII A is sent as “ALT make” 0 6 5 “ALT Break.” *Disable Keypad Emulation Enable Keypad Emulation Emulate Keypad with Leading Zero Enable this to send character sequences sent over the numeric keypad as ISO characters which have a leading zero.
Page 210: Quick Keypad Emulation
9 - 12 DS3578 With FIPS Digital Scanner Product Reference Guide Quick Keypad Emulation This option applies only to the HID Keyboard Emulation Device and if Emulate Keypad is enabled. This parameter enables a quicker method of keypad emulation where ASCII sequences are only sent for ASCII characters not found on the keyboard.
Page 211: Function Key Mapping
USB Interface 9 - 13 Function Key Mapping ASCII values under 32 are normally sent as control-key sequences (see Table 9-2 on page 9-18). When this parameter is enabled, the keys in bold are sent in place of the standard key mapping. Table entries that do not have a bold entry remain the same regardless of this parameter.
Page 212: Convert Case
9 - 14 DS3578 With FIPS Digital Scanner Product Reference Guide Convert Case When enabled, the digital scanner converts all bar code data to the selected case. *No Case Conversion Convert All to Upper Case Convert All to Lower Case...
Page 213: Usb Polling Interval
USB Interface 9 - 15 USB Polling Interval Scan a bar code below to set the polling interval. The polling interval determines the rate at which data can be sent between the digital scanner and host computer. A lower number indicates a faster data rate. NOTE When changing USB Device Types, the cradle automatically restarts.
Page 214 9 - 16 DS3578 With FIPS Digital Scanner Product Reference Guide USB Polling Interval (continued) 5 msec 6 msec 7 msec 8 msec 9 msec...
Page 215: Optional Usb Parameters
USB Interface 9 - 17 Optional USB Parameters If you configure the digital scanner and find the settings were not saved, or changed, when the system is restarted scan the bar codes that follow to override USB interface defaults. Scan a bar code below after setting defaults and before configuring the digital scanner. Ignore Beep The host can send a beep request to the digital scanner.
Page 216: Usb Ascii Character Set
9 - 18 DS3578 With FIPS Digital Scanner Product Reference Guide USB ASCII Character Set USB Prefix/Suffix Values Table 9-2 Prefix/ Suffix Full ASCII Code 39 Keystroke Value Encode Character 1000 CTRL 2 1001 CTRL A 1002 CTRL B 1003...
Page 217 USB Interface 9 - 19 USB Prefix/Suffix Values (Continued) Table 9-2 Prefix/ Suffix Full ASCII Code 39 Keystroke Value Encode Character 1025 CTRL Y 1026 CTRL Z 1027 CTRL [/ESC 1028 CTRL \ 1029 CTRL ] 1030 CTRL 6 1031 CTRL - 1032 Space...
Page 218 9 - 20 DS3578 With FIPS Digital Scanner Product Reference Guide USB Prefix/Suffix Values (Continued) Table 9-2 Prefix/ Suffix Full ASCII Code 39 Keystroke Value Encode Character 1053 1054 1055 1056 1057 1058 1059 1060 < 1061 1062 > 1063...
Page 219 USB Interface 9 - 21 USB Prefix/Suffix Values (Continued) Table 9-2 Prefix/ Suffix Full ASCII Code 39 Keystroke Value Encode Character 1081 1082 1083 1084 1085 1086 1087 1088 1089 1090 1091 1092 1093 1094 1095 1096 1097 1098 1099 1100 1101 1102...
Page 220 9 - 22 DS3578 With FIPS Digital Scanner Product Reference Guide USB Prefix/Suffix Values (Continued) Table 9-2 Prefix/ Suffix Full ASCII Code 39 Keystroke Value Encode Character 1109 1110 1111 1112 1113 1114 1115 1116 1117 1118 1119 1120 1121...
Page 221 USB Interface 9 - 23 USB ALT Key Character Set Table 9-3 ALT Keys Keystroke 2064 ALT 2 2065 ALT A 2066 ALT B 2067 ALT C 2068 ALT D 2069 ALT E 2070 ALT F 2071 ALT G 2072 ALT H 2073 ALT I...
Page 222 9 - 24 DS3578 With FIPS Digital Scanner Product Reference Guide USB GUI Key Character Set Table 9-4 GUI Key Keystroke 3000 Right Control Key 3048 GUI 0 3049 GUI 1 3050 GUI 2 3051 GUI 3 3052 GUI 4...
Page 223 USB Interface 9 - 25 USB GUI Key Character Set (Continued) Table 9-4 GUI Key Keystroke 3081 GUI Q 3082 GUI R 3083 GUI S 3084 GUI T 3085 GUI U 3086 GUI V 3087 GUI W 3088 GUI X 3089 GUI Y 3090...
Page 224 9 - 26 DS3578 With FIPS Digital Scanner Product Reference Guide USB F Key Character Set (Continued) Table 9-5 F Keys Keystroke 5016 5017 5018 5019 5020 5021 5022 5023 5024 USB Numeric Keypad Character Set Table 9-6 Numeric Keypad...
Page 225 USB Interface 9 - 27 USB Extended Keypad Character Set Table 9-7 Extended Keypad Keystroke 7001 Break 7002 Delete 7003 PgUp 7004 7005 Pg Dn 7006 Pause 7007 Scroll Lock 7008 Backspace 7009 7010 Print Screen 7011 Insert 7012 Home 7013 Enter 7014...
Page 226 9 - 28 DS3578 With FIPS Digital Scanner Product Reference Guide...
Page 227: Chapter 10 Ibm 468X/469X Interface
Chapter 10 IBM 468X/469X Interface Introduction This chapter provides instructions for programming the digital scanner to interface with an IBM 468X/469X host computer. Throughout the programming bar code menus, default values are indicated with asterisks ( Disable Convert to Feature/Option Indicates Default Code 39...
Page 228: Connecting To An Ibm 468X/469X Host
10 - 2 DS3578 With FIPS Digital Scanner Product Reference Guide Connecting to an IBM 468X/469X Host This connection is made directly from the cradle to the host interface. Interface cable Host Port Connector IBM Direct Connection Figure 10-1 NOTE Interface cables vary depending on configuration. The connectors illustrated in...
Page 229: Ibm Default Parameters
IBM 468X/469X Interface 10 - 3 IBM Default Parameters Table 10-1 lists the defaults for IBM host parameters. To change any option, scan the appropriate bar code(s) provided in the parameter descriptions section beginning on page 10-4. NOTE See Appendix A, Standard Default Parameters for all user preference, host, symbology, and miscellaneous default parameters.
Page 230: Ibm 468X/469X Host Parameters
10 - 4 DS3578 With FIPS Digital Scanner Product Reference Guide IBM 468X/469X Host Parameters Port Address Use this parameter to set the IBM 468X/469X port. NOTE Scanning one of these bar codes enables the RS-485 interface on the digital scanner.
Page 231: Optional Ibm Parameters
IBM 468X/469X Interface 10 - 5 Optional IBM Parameters If you configure the digital scanner and find the settings were not saved, or changed, when the system is restarted scan the bar codes that follow to override IBM interface defaults. Scan a bar code below after setting defaults and before configuring the digital scanner.
Page 232 10 - 6 DS3578 With FIPS Digital Scanner Product Reference Guide...
Page 233: Chapter 11 123Scan2
Chapter 11 123Scan2 Introduction 123Scan² is an easy-to-use, PC-based software tool that enables rapid and easy customized setup of Motorola scanners. 123Scan² uses a wizard tool to guide users through a streamlined set up process. Settings are saved in a configuration file that can be distributed via e-mail, electronically downloaded via a USB cable, or used to generate a sheet of scannable programming bar codes.
Page 234: 123Scan2 Requirements
11 - 2 DS3578 With FIPS Digital Scanner Product Reference Guide 123Scan Requirements • Host computer with Windows XP SP2 or Windows 7 • Scanner • Cradle • USB cable. For more information on 123Scan², go to: http://www.motorolasolutions.com/123Scan. For a 1 minute video tour of 123Scan², go to: http://www.motorolasolutions.com/scannerhowtovideos...
Page 235: Chapter 12 Ocr Programming
Chapter 12 OCR Programming Introduction This chapter describes how to set up the digital scanner for OCR programming. The digital scanner can read 6 to 60 point OCR typeface. It supports font types OCR-A, OCR-B, MICR-E13B, and US Currency Serial Number. OCR is not as secure as a bar code.
Page 236: Ocr Parameter Defaults
12 - 2 DS3578 With FIPS Digital Scanner Product Reference Guide OCR Parameter Defaults Table 12-1 lists the defaults for OCR parameters. To change any option, scan the appropriate bar code(s) provided in the Parameter Descriptions section beginning on page 12-3.
Page 237: Ocr Programming Parameters
OCR Programming 12 - 3 OCR Programming Parameters Enable/Disable OCR-A Parameter # F1h A8h To enable or disable OCR-A, scan one of the following bar codes. Enable OCR-A (01h) *Disable OCR-A (00h) OCR-A Variant Parameter # F1h ACh Font variant sets a processing algorithm and default character subset for the given font. To choose a variant, scan one of the following bar codes.
Page 238 12 - 4 DS3578 With FIPS Digital Scanner Product Reference Guide NOTE Enable OCR-A before setting this parameter. If disabling OCR-A, set the variant to its default (OCR-A Full ASCII). *OCR-A Full ASCII (00h) OCR-A Reserved 1 (01h) OCR-A Reserved 2...
Page 239: Enable/Disable Ocr-B
OCR Programming 12 - 5 Enable/Disable OCR-B Parameter # F1h A9h To enable or disable OCR-B, scan one of the following bar codes. Enable OCR-B (01h) *Disable OCR-B (00h)
Page 240: Ocr-B Variant
12 - 6 DS3578 With FIPS Digital Scanner Product Reference Guide OCR-B Variant Parameter # F1h ADh OCR-B has the following variants. Selecting the most appropriate font variant affects performance and accuracy. • OCR-B Full ASCII !#$%()*+,-./0123456789<>ABCDEFGHIJKLMNOPQRSTUVWXYZ^|Ñ • OCR-B Banking #+-0123456789<>JNP|...
Page 241 OCR Programming 12 - 7 OCR-B Variant (continued) *OCR-B Full ASCII (00h) OCR-B Banking (01h) OCR-B Limited (02h) OCR-B Travel Document Version 1 (TD1) 3 Line ID Cards (03h) OCR-B Passport (04h)
Page 242 12 - 8 DS3578 With FIPS Digital Scanner Product Reference Guide OCR-B Variant (continued) OCR-B ISBN 10-Digit Book Numbers (06h) OCR-B ISBN 10 or 13-Digit Book Numbers (07h) OCR-B Travel Document Version 2 (TD2) 2-Line ID Cards (08h) OCR-B Visa Type A...
Page 243: Enable/Disable Micr E13B
OCR Programming 12 - 9 Enable/Disable MICR E13B Parameter # F1h AAh To enable or disable MICR E13B, scan one of the following bar codes. MICR E 13B uses the following characters: TOAD characters (Transit, On Us, Amount, and Dash) output as the following representative characters: outputs as outputs as outputs as...
Page 244: Ocr Orientation
12 - 10 DS3578 With FIPS Digital Scanner Product Reference Guide OCR Orientation Parameter # F1h AFh Select one of five options to specify the orientation of an OCR string to be read: • to the imaging engine (default) •...
Page 245: Ocr Lines
OCR Programming 12 - 11 OCR Lines Parameter # F1h B3h To select the number of OCR lines to decode, scan one of the following bar codes. Selecting Visas, Passport, TD1, or TD2 ID cards automatically sets the appropriate . Also see OCR-B Variant on page 12-6.
Page 246: Ocr Maximum Characters
12 - 12 DS3578 With FIPS Digital Scanner Product Reference Guide OCR Maximum Characters Parameter # F1h B2h To select the maximum number of OCR characters (including spaces) per line to decode, scan the following bar code, then scan a three-digit number between 003 and 100 using the numeric keypad in...
Page 247: Ocr Subset
OCR Programming 12 - 13 OCR Subset Parameter # F1h AEh Set an OCR subset to define a custom group of characters in place of a preset font variant. For example, if scanning only numbers and the letters A, B, and C, create a subset of just these characters to speed decoding. This applies a designated OCR Subset across all enabled OCR fonts.
Page 248: Ocr Bright Illumination
OCR Bright Illumination Parameter # F1h BDh When enabled, image contrast is improved for OCR scanning. Motorola recommends enabling this when the OCR string is longer than 20 characters, and for applications with busy backgrounds such as passport, check, or VISA reading.
Page 249: Ocr Template
OCR Programming 12 - 15 OCR Template Parameter # F1h 23h This option creates a template for precisely matching scanned OCR characters to a desired input format. Carefully constructing an OCR template eliminates scanning errors. To set or modify the OCR decode template, scan the OCR Template bar code, then bar codes corresponding to numbers and letters on the following pages to form the template expression.
Page 250 12 - 16 DS3578 With FIPS Digital Scanner Product Reference Guide Optional Alphanumeric (1) When this option appears in the template string, the data validator accepts an alphanumeric character if present. Optional characters are not allowed as the first character(s) in a field of like characters.
Page 251 OCR Programming 12 - 17 Any Including Space & Reject (4) The template accepts any character in this position, including space and reject. Rejects are represented as an underscore (_) in the output. This is a good selection for troubleshooting. Template Valid data Valid data...
Page 252 12 - 18 DS3578 With FIPS Digital Scanner Product Reference Guide Digit or Fill (8) The data validator accepts any numeric or fill character in this position. Template Valid data Valid data Invalid data 88899 12345 >>789 <<789 Alpha or Fill (F) The data validator accepts any alpha or fill character in this position.
Page 253 OCR Programming 12 - 19 Optional Small Special (.) When this option appears in the template string, the data validator accepts a special character if present. Optional characters are not allowed as the first character(s) in a field of like characters. Small special characters are - , and . Template Valid data Valid data...
Page 254 12 - 20 DS3578 With FIPS Digital Scanner Product Reference Guide New Line (E) To create a template of multiple lines, add between the template of each single line. Template Valid data Valid data Invalid data 999EAAAA XYZW BCAD ZXYW String Extract (C) This operator combined with others defines a string of characters to extract from the scanned data.
Page 255 OCR Programming 12 - 21 Ignore to End of Field (D) This operator causes all characters after a template to be ignored. Use this as the last character in a template expression. Examples for the template 999D: Template Incoming data Output 999D 123-PED...
Page 256 12 - 22 DS3578 With FIPS Digital Scanner Product Reference Guide The trigger character or literal string is included in output from a Skip Until operator, and the first character in the template should accommodate this trigger. Template Incoming data Output P1"PN"AA999...
Page 257 OCR Programming 12 - 23 The trigger character or literal string is not included in output from a Skip Until Not operator. Template Incoming data Output P0A9999 BPN3456 3456 PN1234 PN1234 5341 5341 Template Incoming data Output P0"PN"9999 PN3456 3456 5341 5341 PNPN7654...
Page 258: Ocr Check Digit Modulus
12 - 24 DS3578 With FIPS Digital Scanner Product Reference Guide Template Examples Following are sample templates with descriptions of valid data for each definition. Field Definition Description followed by three digits and two optional digits. "M"99977 followed by two digits, four optional digits, and an X.
Page 259: Ocr Check Digit Multiplier
OCR Programming 12 - 25 OCR Check Digit Multiplier Parameter # F1h BCh This option sets OCR check digit multipliers for the character positions. For check digit validation, each character in scanned data has an equivalent weight used in the check digit calculation. DS35787 OCR ships with the following weight equivalents: 0 = 0 A = 10...
Page 260: Ocr Check Digit Validation
12 - 26 DS3578 With FIPS Digital Scanner Product Reference Guide OCR Check Digit Validation Parameter # F1h B6h to protect against scanning errors by applying a check digit validation scheme. The OCR Check Digit Validation following is a list of options.
Page 261 OCR Programming 12 - 27 Product Add Right to Left Each character in the scanned data is assigned a numeric value (see OCR Check Digit Multiplier on page 12-25). The check digit multiplier is reversed in order. Each value representing a character in the scanned data is multiplied by its corresponding digit in the reversed multiplier, resulting in a product for each character in the scanned data.
Page 262 12 - 28 DS3578 With FIPS Digital Scanner Product Reference Guide Digit Add Right to Left Each character in the scanned data is assigned a numeric value (see OCR Check Digit Multiplier on page 12-25). The check digit multiplier is reversed in order. Each value representing a character in the scanned data is multiplied by its corresponding digit in the reversed multiplier, resulting in a product for each character in the scanned data.
Page 263 OCR Programming 12 - 29 Product Add Right to Left Simple Remainder Each character in the scanned data is assigned a numeric value (see OCR Check Digit Multiplier on page 12-25). The check digit multiplier is reversed in order. Each value representing a character in the scanned data is multiplied by its corresponding digit in the reversed multiplier, resulting in a product for each character in the scanned data.
Page 264 12 - 30 DS3578 With FIPS Digital Scanner Product Reference Guide Digit Add Right To Left Simple Remainder Each character in the scanned data is assigned a numeric value (see OCR Check Digit Multiplier on page 12-25). The check digit multiplier is reversed in order. Each value representing a character in the scanned data is multiplied by its corresponding digit in the reversed multiplier, resulting in a product for each character in the scanned data.
Page 265: Chapter 13 Symbologies
Chapter 13 Symbologies Introduction This chapter describes symbology features and provides the programming bar codes for selecting these features. Before programming, follow the instructions in Chapter 1, Getting Started. To set feature values, scan a single bar code or a short bar code sequence. The settings are stored in non-volatile memory and are preserved even when the digital scanner is powered down.
Page 266: Errors While Scanning
13 - 2 DS3578 With FIPS Digital Scanner Product Reference Guide Errors While Scanning Unless otherwise specified, to correct an error during a scanning sequence, just re-scan the correct parameter. Symbology Parameter Defaults Table 13-1 lists the defaults for all symbologies parameters. There are two ways to change the default values: •...
Page 267 Symbologies 13 - 3 Parameter Defaults (Continued) Table 13-1 Parameter Page Parameter Default Number Number UPC-E Preamble System Character 13-17 UPC-E1 Preamble System Character 13-19 Convert UPC-E to A Disable 13-20 Convert UPC-E1 to A Disable 13-20 EAN-8/JAN-8 Extend Disable 13-21 Bookland ISBN Format F1h 40h...
Page 268 13 - 4 DS3578 With FIPS Digital Scanner Product Reference Guide Parameter Defaults (Continued) Table 13-1 Parameter Page Parameter Default Number Number Code 11 Code 11 Disable 13-38 Set Lengths for Code 11 1Ch, 1Dh 4 to 55 13-38 Code 11 Check Digit Verification...
Page 269 Symbologies 13 - 5 Parameter Defaults (Continued) Table 13-1 Parameter Page Parameter Default Number Number Matrix 2 of 5 Lengths F1h 6Bh 1 Length - 14 13-55 F1h 6Ch Matrix 2 of 5 Check Digit F1h 6Eh Disable 13-56 Transmit Matrix 2 of 5 Check Digit F1h 6Fh Disable 13-56...
Page 270 13 - 6 DS3578 With FIPS Digital Scanner Product Reference Guide Parameter Defaults (Continued) Table 13-1 Parameter Page Parameter Default Number Number Composite Beep Mode F0h 8Eh Beep As Each Code 13-69 Type is Decoded GS1-128 Emulation Mode for UCC/EAN Composite...
Page 271: Upc/Ean
Symbologies 13 - 7 UPC/EAN Enable/Disable UPC-A Parameter # 01h To enable or disable UPC-A, scan the appropriate bar code below Enable UPC-A (01h) Disable UPC-A (00h) Enable/Disable UPC-E Parameter # 02h To enable or disable UPC-E, scan the appropriate bar code below Enable UPC-E (01h) Disable UPC-E...
Page 272: Enable/Disable Upc-E1
13 - 8 DS3578 With FIPS Digital Scanner Product Reference Guide Enable/Disable UPC-E1 Parameter # 0Ch UPC-E1 is disabled by default. To enable or disable UPC-E1, scan the appropriate bar code below. NOTE UPC-E1 is not a UCC (Uniform Code Council) approved symbology.
Page 273: Enable/Disable Bookland Ean
Symbologies 13 - 9 Enable/Disable EAN-13/JAN-13 Parameter # 03h To enable or disable EAN-13/JAN-13, scan the appropriate bar code below Enable EAN-13/JAN-13 (01h) Disable EAN-13/JAN-13 (00h) Enable/Disable Bookland EAN Parameter # 53h To enable or disable Bookland EAN, scan the appropriate bar code below. Enable Bookland EAN (01h) Disable Bookland EAN...
Page 274: Decode Upc/Ean/Jan Supplementals
13 - 10 DS3578 With FIPS Digital Scanner Product Reference Guide Decode UPC/EAN/JAN Supplementals Parameter # 10h Supplementals are bar codes appended according to specific format conventions (e.g., UPC A+2, UPC E+2, EAN 13+2). The following options are available: •...
Page 275 Symbologies 13 - 11 Decode UPC/EAN/JAN Supplementals (continued) Decode UPC/EAN/JAN Only With Supplementals (01h) Ignore Supplementals (00h) Autodiscriminate UPC/EAN/JAN Supplementals (02h) Enable 378/379 Supplemental Mode (04h) Enable 978/979 Supplemental Mode (05h) Enable 977 Supplemental Mode (07h)
Page 276 13 - 12 DS3578 With FIPS Digital Scanner Product Reference Guide Decode UPC/EAN/JAN Supplementals (continued) 414/419/434/439 Supplemental Mode Enable (06h) 491 Supplemental Mode Enable (08h) Enable Smart Supplemental Mode (03h) Supplemental User-Programmable Type 1 (09h) Supplemental User-Programmable Type 1 and 2...
Page 277: User-Programmable Supplementals
Symbologies 13 - 13 User-Programmable Supplementals Supplemental 1: Parameter # F1h 43h Supplemental 2: Parameter # F1h 44h If you selected a Supplemental User-Programmable option from Decode UPC/EAN/JAN Supplementals on page 13-10, select User-Programmable Supplemental 1 to set the 3-digit prefix. Then select the 3 digits using the numeric bar codes beginning on page E-1.
Page 278: Upc/Ean/Jan Supplemental Redundancy
13 - 14 DS3578 With FIPS Digital Scanner Product Reference Guide UPC/EAN/JAN Supplemental Redundancy Parameter # 50h With Autodiscriminate UPC/EAN/JAN Supplementals selected, this option adjusts the number of times a symbol without supplementals is decoded before transmission. The range is from two to thirty times. Five or above is recommended when decoding a mix of UPC/EAN/JAN symbols with and without supplementals, and the autodiscriminate option is selected.
Page 279: Upc/Ean/Jan Supplemental Aim Id Format
Symbologies 13 - 15 UPC/EAN/JAN Supplemental AIM ID Format Parameter # F1h A0h Select an output format when reporting UPC/EAN/JAN bar codes with Supplementals with Transmit Code ID Character on page 5-41 set to AIM Code ID Character • - transmit UPC/EAN with supplementals with separate AIM IDs but one transmission, i.e.: Separate ]E<0 or 4><data>]E<1 or 2>[supplemental data] •...
Page 280: Transmit Upc-A Check Digit
13 - 16 DS3578 With FIPS Digital Scanner Product Reference Guide Transmit UPC-A Check Digit Parameter # 28h The check digit is the last character of the symbol used to verify the integrity of the data. Scan the appropriate bar code below to transmit the bar code data with or without the UPC-A check digit.
Page 281: Transmit Upc-E1 Check Digit
Symbologies 13 - 17 Transmit UPC-E1 Check Digit Parameter # 2Ah The check digit is the last character of the symbol used to verify the integrity of the data. Scan the appropriate bar code below to transmit the bar code data with or without the UPC-E1 check digit. It is always verified to guarantee the integrity of the data.
Page 282: Upc-E Preamble
13 - 18 DS3578 With FIPS Digital Scanner Product Reference Guide UPC-E Preamble Parameter # 23h Preamble characters are part of the UPC symbol, and include Country Code and System Character. There are three options for transmitting a UPC-E preamble to the host device: transmit System Character only, transmit System Character and Country Code (“0”...
Page 283: Upc-E1 Preamble
Symbologies 13 - 19 UPC-E1 Preamble Parameter # 24h Preamble characters are part of the UPC symbol, and include Country Code and System Character. There are three options for transmitting a UPC-E1 preamble to the host device: transmit System Character only, transmit System Character and Country Code (“0”...
Page 284: Convert Upc-E To Upc-A
13 - 20 DS3578 With FIPS Digital Scanner Product Reference Guide Convert UPC-E to UPC-A Parameter # 25h Enable this to convert UPC-E (zero suppressed) decoded data to UPC-A format before transmission. After conversion, the data follows UPC-A format and is affected by UPC-A programming selections (e.g., Preamble, Check Digit).
Page 285: Ean-8/Jan-8 Extend
Symbologies 13 - 21 EAN-8/JAN-8 Extend Parameter # 27h Enable this parameter to add five leading zeros to decoded EAN-8 symbols to make them compatible in format to EAN-13 symbols. Disable this to transmit EAN-8 symbols as is. Enable EAN/JAN Zero Extend (01h) Disable EAN/JAN Zero Extend (00h)
Page 286: Ucc Coupon Extended Code
13 - 22 DS3578 With FIPS Digital Scanner Product Reference Guide UCC Coupon Extended Code Parameter # 55h Enable this parameter in conjunction with Coupon Report on page 13-23 to decode one of the following types of coupons: • GS1 Databar Expanded coupons (set...
Page 287: Coupon Report
Symbologies 13 - 23 Coupon Report Parameter # F1h DAh Select an option to determine which type of coupon format to support. • Select Old Coupon Format to support UPC-A/GS1-128 and EAN-13/GS1-128. • Select New Coupon Format as an interim format to support UPC-A/GS1-DataBar and EAN-13/GS1-DataBar.
Page 288: Issn Ean
13 - 24 DS3578 With FIPS Digital Scanner Product Reference Guide ISSN EAN Parameter # F1h 69h To enable or disable ISSN EAN, scan the appropriate bar code below. Enable ISSN EAN (01h) Disable ISSN EAN (00h)
Page 289: Code 128
Symbologies 13 - 25 Code 128 Enable/Disable Code 128 Parameter # 08h To enable or disable Code 128, scan the appropriate bar code below. Enable Code 128 (01h) Disable Code 128 (00h) Set Lengths for Code 128 Parameter # L1 = D1h, L2 = D2h The length of a code refers to the number of characters (i.e., human readable characters), including check digit(s) the code contains.
Page 290: Set Lengths For Code 128
13 - 26 DS3578 With FIPS Digital Scanner Product Reference Guide Set Lengths for Code 128 (continued) Code 128 - One Discrete Length Code 128 - Two Discrete Lengths Code 128 - Length Within Range *Code 128 - Any Length...
Page 291: Enable/Disable Gs1-128 (Formerly Ucc/Ean-128)
Symbologies 13 - 27 Enable/Disable GS1-128 (formerly UCC/EAN-128) Parameter # 0Eh To enable or disable GS1-128, scan the appropriate bar code below. Enable GS1-128 (01h) Disable GS1-128 (00h) Enable/Disable ISBT 128 Parameter # 54h ISBT 128 is a variant of Code 128 used in the blood bank industry. Scan a bar code below to enable or disable ISBT 128.
Page 292: Isbt Concatenation
13 - 28 DS3578 With FIPS Digital Scanner Product Reference Guide ISBT Concatenation Parameter # F1h 41h Select an option for concatenating pairs of ISBT code types: • If you select Disable ISBT Concatenation, the digital scanner does not concatenate pairs of ISBT codes it encounters.
Page 293: Check Isbt Table
Symbologies 13 - 29 Check ISBT Table Parameter # F1h 42h The ISBT specification includes a table that lists several types of ISBT bar codes that are commonly used in pairs. If you set ISBT Concatenation to Enable, enable Check ISBT Table to concatenate only those pairs found in this table.
Page 294: Code 39
13 - 30 DS3578 With FIPS Digital Scanner Product Reference Guide Code 39 Enable/Disable Code 39 Parameter # 00h To enable or disable Code 39, scan the appropriate bar code below. Enable Code 39 (01h) Disable Code 39 (00h) Enable/Disable Trioptic Code 39 Parameter # 0Dh Trioptic Code 39 is a variant of Code 39 used in the marking of computer tape cartridges.
Page 295: Convert Code 39 To Code 32
Symbologies 13 - 31 Convert Code 39 to Code 32 Parameter # 56h Code 32 is a variant of Code 39 used by the Italian pharmaceutical industry. Scan the appropriate bar code below to enable or disable converting Code 39 to Code 32. NOTE Code 39 must be enabled for this parameter to function.
Page 296: Set Lengths For Code 39
13 - 32 DS3578 With FIPS Digital Scanner Product Reference Guide Set Lengths for Code 39 Parameter # L1 = 12h, L2 = 13h The length of a code refers to the number of characters (i.e., human readable characters), including check digit(s) the code contains.
Page 297 Symbologies 13 - 33 Set Lengths for Code 39 (continued) Code 39 - One Discrete Length Code 39 - Two Discrete Lengths Code 39 - Length Within Range Code 39 - Any Length...
Page 298: Code 39 Check Digit Verification
13 - 34 DS3578 With FIPS Digital Scanner Product Reference Guide Code 39 Check Digit Verification Parameter # 30h Enable this feature to check the integrity of all Code 39 symbols to verify that the data complies with specified check digit algorithm. Only Code 39 symbols which include a modulo 43 check digit are decoded. Enable this feature if the Code 39 symbols contain a Modulo 43 check digit.
Page 299: Code 39 Full Ascii Conversion
Symbologies 13 - 35 Code 39 Full ASCII Conversion Parameter # 11h Code 39 Full ASCII is a variant of Code 39 which pairs characters to encode the full ASCII character set. To enable or disable Code 39 Full ASCII, scan the appropriate bar code below. Enable Code 39 Full ASCII (01h) Disable Code 39 Full ASCII...
Page 300: Code 93
13 - 36 DS3578 With FIPS Digital Scanner Product Reference Guide Code 93 Enable/Disable Code 93 Parameter # 09h To enable or disable Code 93, scan the appropriate bar code below. Enable Code 93 (01h) Disable Code 93 (00h) Set Lengths for Code 93 Parameter # L1 = 1Ah, L2 = 1Bh The length of a code refers to the number of characters (i.e., human readable characters), including check digit(s)
Page 301: Set Lengths For Code 93
Symbologies 13 - 37 Set Lengths for Code 93 (continued) Code 93 - One Discrete Length Code 93 - Two Discrete Lengths Code 93 - Length Within Range Code 93 - Any Length...
Page 302: Set Lengths For Code 11
13 - 38 DS3578 With FIPS Digital Scanner Product Reference Guide Code 11 Code 11 Parameter # 0Ah To enable or disable Code 11, scan the appropriate bar code below. Enable Code 11 (01h) Disable Code 11 (00h) Set Lengths for Code 11 Parameter # L1 = 1Ch, L2 = 1Dh The length of a code refers to the number of characters (i.e., human readable characters), including check digit(s)
Page 303: Code 11
Symbologies 13 - 39 Set Lengths for Code 11 (continued) Code 11 - One Discrete Length Code 11 - Two Discrete Lengths Code 11 - Length Within Range Code 11 - Any Length...
Page 304: Code 11 Check Digit Verification
13 - 40 DS3578 With FIPS Digital Scanner Product Reference Guide Code 11 Check Digit Verification Parameter # 34h This feature allows the digital scanner to check the integrity of all Code 11 symbols to verify that the data complies with the specified check digit algorithm.
Page 305: Interleaved 2 Of 5 (Itf)
Symbologies 13 - 41 Interleaved 2 of 5 (ITF) Enable/Disable Interleaved 2 of 5 Parameter # 06h To enable or disable Interleaved 2 of 5, scan the appropriate bar code below, and select an Interleaved 2 of 5 length from the following pages. Enable Interleaved 2 of 5 (01h) *Disable Interleaved 2 of 5...
Page 306 13 - 42 DS3578 With FIPS Digital Scanner Product Reference Guide Set Lengths for Interleaved 2 of 5 I 2 of 5 - One Discrete Length I 2 of 5 - Two Discrete Lengths I 2 of 5 - Length Within Range...
Page 307: I 2 Of 5 Check Digit Verification
Symbologies 13 - 43 I 2 of 5 Check Digit Verification Parameter # 31h Enable this feature to check the integrity of all I 2 of 5 symbols to verify the data complies with either the specified Uniform Symbology Specification (USS), or the Optical Product Code Council (OPCC) check digit algorithm. Disable (00h) USS Check Digit...
Page 308: Convert I 2 Of 5 To Ean-13
13 - 44 DS3578 With FIPS Digital Scanner Product Reference Guide Convert I 2 of 5 to EAN-13 Parameter # 52h Enable this parameter to convert 14-character I 2 of 5 codes to EAN-13, and transmit to the host as EAN-13. To accomplish this, the I 2 of 5 code must be enabled, and the code must have a leading zero and a valid EAN-13 check digit.
Page 309: Discrete 2 Of 5 (Dtf)
Symbologies 13 - 45 Discrete 2 of 5 (DTF) Enable/Disable Discrete 2 of 5 Parameter # 05h To enable or disable Discrete 2 of 5, scan the appropriate bar code below. Enable Discrete 2 of 5 (01h) Disable Discrete 2 of 5 (00h) Set Lengths for Discrete 2 of 5 Parameter # L1 = 14h, L2 = 15h...
Page 310: Set Lengths For Discrete 2 Of 5
13 - 46 DS3578 With FIPS Digital Scanner Product Reference Guide Set Lengths for Discrete 2 of 5 (continued) D 2 of 5 - One Discrete Length D 2 of 5 - Two Discrete Lengths D 2 of 5 - Length Within Range...
Page 311: Codabar (Nw - 7)
Symbologies 13 - 47 Codabar (NW - 7) Enable/Disable Codabar Parameter # 07h To enable or disable Codabar, scan the appropriate bar code below. Enable Codabar (01h) Disable Codabar (00h) Set Lengths for Codabar Parameter # L1 = 18h, L2 = 19h The length of a code refers to the number of characters (i.e., human readable characters), including check digit(s) the code contains.
Page 312 13 - 48 DS3578 With FIPS Digital Scanner Product Reference Guide Set Lengths for Codabar (continued) Codabar - One Discrete Length Codabar - Two Discrete Lengths Codabar - Length Within Range Codabar - Any Length...
Page 313: Clsi Editing
Symbologies 13 - 49 CLSI Editing Parameter # 36h Enable this parameter to strip the start and stop characters and insert a space after the first, fifth, and tenth characters of a 14-character Codabar symbol. Enable this feature if the host system requires this data format. NOTE Symbol length does not include start and stop characters.
Page 314: Msi
13 - 50 DS3578 With FIPS Digital Scanner Product Reference Guide Enable/Disable MSI Parameter # 0Bh To enable or disable MSI, scan the appropriate bar code below. Enable MSI (01h) Disable MSI (00h) Set Lengths for MSI Parameter # L1 = 1Eh, L2 = 1Fh The length of a code refers to the number of characters (i.e., human readable characters), including check digit(s)
Page 315 Symbologies 13 - 51 Set Lengths for MSI (continued) MSI - One Discrete Length MSI - Two Discrete Lengths MSI - Length Within Range MSI - Any Length...
Page 316: Msi Check Digits
13 - 52 DS3578 With FIPS Digital Scanner Product Reference Guide MSI Check Digits Parameter # 32h With MSI symbols, one check digit is mandatory and always verified by the reader. The second check digit is optional. If the MSI codes include two check digits, scan the Two MSI Check Digits bar code to enable verification of the second check digit.
Page 317: Msi Check Digit Algorithm
Symbologies 13 - 53 MSI Check Digit Algorithm Parameter # 33h Two algorithms are possible for the verification of the second MSI check digit. Select the bar code below corresponding to the algorithm used to encode the check digit. MOD 10/MOD 11 (00h) MOD 10/MOD 10 (01h)
Page 318: Chinese 2 Of 5
13 - 54 DS3578 With FIPS Digital Scanner Product Reference Guide Chinese 2 of 5 Enable/Disable Chinese 2 of 5 Parameter # F0h 98h To enable or disable Chinese 2 of 5, scan the appropriate bar code below. Enable Chinese 2 of 5...
Page 319: Set Lengths For Matrix 2 Of 5
Symbologies 13 - 55 Set Lengths for Matrix 2 of 5 Parameter # L1 = F1h 6Bh, L2 = F1h 6Ch The length of a code refers to the number of characters (i.e., human readable characters), including check digit(s) the code contains. Set lengths for Matrix 2 of 5 to any length, one or two discrete lengths, or lengths within a specific range.
Page 320: Matrix 2 Of 5 Check Digit
13 - 56 DS3578 With FIPS Digital Scanner Product Reference Guide Matrix 2 of 5 Check Digit Parameter # F1h 6Eh The check digit is the last character of the symbol used to verify the integrity of the data. Scan the appropriate bar code below to transmit the bar code data with or without the Matrix 2 of 5 check digit.
Page 321: Korean 3 Of 5
Symbologies 13 - 57 Korean 3 of 5 Enable/Disable Korean 3 of 5 Parameter # F1h 45h To enable or disable Korean 3 of 5, scan the appropriate bar code below. NOTE The length for Korean 3 of 5 is fixed at 6. Enable Korean 3 of 5 (01h) Disable Korean 3 of 5...
Page 322: Inverse 1D
13 - 58 DS3578 With FIPS Digital Scanner Product Reference Guide Inverse 1D Parameter # F1h 4Ah This parameter sets the 1-D inverse decoder setting. Options are: • - the digital scanner decodes regular 1-D bar codes only. Regular Only •...
Page 323: Postal Codes
Symbologies 13 - 59 Postal Codes US Postnet Parameter # 59h To enable or disable US Postnet, scan the appropriate bar code below. Enable US Postnet (01h) Disable US Postnet (00h) US Planet Parameter # 5Ah To enable or disable US Planet, scan the appropriate bar code below. Enable US Planet (01h) *Disable US Planet...
Page 324: Transmit Us Postal Check Digit
13 - 60 DS3578 With FIPS Digital Scanner Product Reference Guide Transmit US Postal Check Digit Parameter # 5Fh Select whether to transmit US Postal data, which includes both US Postnet and US Planet, with or without the check digit.
Page 325: Transmit Uk Postal Check Digit
Symbologies 13 - 61 Transmit UK Postal Check Digit Parameter # 60h Select whether to transmit UK Postal data with or without the check digit. Transmit UK Postal Check Digit (01h) Do Not Transmit UK Postal Check Digit (00h) Japan Postal Parameter # F0h 22h To enable or disable Japan Postal, scan the appropriate bar code below.
Page 326: Australian Postal
13 - 62 DS3578 With FIPS Digital Scanner Product Reference Guide Australian Postal Parameter # F0h 23h To enable or disable Australian Postal, scan the appropriate bar code below. Enable Australian Postal (01h) Disable Australian Postal (00h) Netherlands KIX Code Parameter # F0h 46h To enable or disable Netherlands KIX Code, scan the appropriate bar code below.
Page 327: Usps 4Cb/One Code/Intelligent Mail
Symbologies 13 - 63 USPS 4CB/One Code/Intelligent Mail Parameter # F1h 50h To enable or disable USPS 4CB/One Code/Intelligent Mail, scan the appropriate bar code below. Enable USPS 4CB/One Code/Intelligent Mail (01h) Disable USPS 4CB/One Code/Intelligent Mail (00h) UPU FICS Postal Parameter # F1h 63h To enable or disable UPU FICS Postal, scan the appropriate bar code below.
Page 328: Gs1 Databar
13 - 64 DS3578 With FIPS Digital Scanner Product Reference Guide GS1 DataBar The variants of GS1 DataBar are DataBar-14, DataBar Expanded, and DataBar Limited. The limited and expanded versions have stacked variants. Scan the appropriate bar code below to enable or disable each variant of GS1 DataBar.
Page 329: Gs1 Databar Limited Security Level
Symbologies 13 - 65 GS1 DataBar Limited Security Level Parameter # F1h D8h The digital scanner offers four levels of decode security for GS1 DataBar Limited bar codes. There is an inverse relationship between security and digital scanner aggressiveness. Increasing the level of security may result in reduced aggressiveness in scanning, so choose only that level of security necessary.
Page 330: Gs1 Databar Expanded
13 - 66 DS3578 With FIPS Digital Scanner Product Reference Guide GS1 DataBar Expanded Parameter # F0h 54h Enable GS1 DataBar Expanded (01h) Disable GS1 DataBar Expanded (00h) Convert GS1 DataBar to UPC/EAN Parameter # F0h 8Dh This parameter only applies to DataBar-14 and DataBar Limited symbols not decoded as part of a Composite symbol.
Page 331: Composite
Symbologies 13 - 67 Composite Composite CC-C Parameter # F0h 55h Scan a bar code below to enable or disable Composite bar codes of type CC-C. Enable CC-C (01h) Disable CC-C (00h) Composite CC-A/B Parameter # F0h 56h Scan a bar code below to enable or disable Composite bar codes of type CC-A/B. Enable CC-A/B (01h) Disable CC-A/B...
Page 332: Composite Tlc-39
13 - 68 DS3578 With FIPS Digital Scanner Product Reference Guide Composite TLC-39 Parameter # F0h 73h Scan a bar code below to enable or disable Composite bar codes of type TLC-39. Enable TLC39 (01h) Disable TLC39 (00h) UPC Composite Mode...
Page 333: Composite Beep Mode
Symbologies 13 - 69 Composite Beep Mode Parameter # F0h 8Eh To select the number of decode beeps when a composite bar code is decoded, scan the appropriate bar code. Single Beep after both are decoded (00h) Beep as each code type is decoded (01h) Double Beep after both are decoded (02h)
Page 334: 2D Symbologies
13 - 70 DS3578 With FIPS Digital Scanner Product Reference Guide 2D Symbologies Enable/Disable PDF417 Parameter # 0Fh To enable or disable PDF417, scan the appropriate bar code below. Enable PDF417 (01h) Disable PDF417 (00h) Enable/Disable MicroPDF417 Parameter # E3h To enable or disable MicroPDF417, scan the appropriate bar code below.
Page 335: Code 128 Emulation
Symbologies 13 - 71 Code 128 Emulation Parameter # 7Bh Enable this parameter to transmit data from certain MicroPDF417 symbols as Code 128. Transmit Code ID Character on page 5-41 must be enabled for this parameter to work. Enable Code 128 Emulation to transmit these MicroPDF417 symbols with one of the following prefixes: if the first codeword is 903-905 if the first codeword is 908 or 909 if the first codeword is 910 or 911...
Page 336: Data Matrix
13 - 72 DS3578 With FIPS Digital Scanner Product Reference Guide Data Matrix Parameter # F0h 24h To enable or disable Data Matrix, scan the appropriate bar code below. Enable Data Matrix (01h) Disable Data Matrix (00h) Data Matrix Inverse Parameter # F1h 4Ch This parameter sets the Data Matrix inverse decoder setting.
Page 337: Maxicode
Symbologies 13 - 73 Maxicode Parameter # F0h 26h To enable or disable Maxicode, scan the appropriate bar code below. Enable Maxicode (01h) Disable Maxicode (00h) QR Code Parameter # F0h 25h To enable or disable QR Code, scan the appropriate bar code below. Enable QR Code (01h) Disable QR Code...
Page 338: Qr Inverse
13 - 74 DS3578 With FIPS Digital Scanner Product Reference Guide QR Inverse Parameter # F1h 4Bh This parameter sets the QR inverse decoder setting. Options are: • - the digital scanner decodes regular QR bar codes only. Regular Only •...
Page 339: Aztec
Symbologies 13 - 75 Aztec Parameter # F1h 3Eh To enable or disable Aztec, scan the appropriate bar code below. Enable Aztec (01h) Disable Aztec (00h) Aztec Inverse Parameter # F1h 4Dh This parameter sets the Aztec inverse decoder setting. Options are: •...
Page 340: Redundancy Level 1
13 - 76 DS3578 With FIPS Digital Scanner Product Reference Guide Redundancy Level Parameter # 4Eh The digital scanner offers four levels of decode redundancy. Select higher redundancy levels for decreasing levels of bar code quality. As redundancy levels increase, the digital scanner’s aggressiveness decreases.
Page 341: Redundancy Level 4
Symbologies 13 - 77 Redundancy Level (continued) Redundancy Level 4 The following code types must be successfully read three times before being decoded: Redundancy Level 4 Codes Table 13-5 Code Type Code Length Redundancy Level 1 (01h) Redundancy Level 2 (02h) Redundancy Level 3 (03h)
Page 342: Security Level
13 - 78 DS3578 With FIPS Digital Scanner Product Reference Guide Security Level Parameter # 4Dh The digital scanner offers four levels of decode security for delta bar codes, which include the Code 128 family, UPC/EAN, and Code 93. Select increasing levels of security for decreasing levels of bar code quality. There is an inverse relationship between security and digital scanner aggressiveness, so choose only that level of security necessary for any given application.
Page 343: Intercharacter Gap Size
Symbologies 13 - 79 Intercharacter Gap Size Parameter # F0h 7Dh The Code 39 and Codabar symbologies have an intercharacter gap that is typically quite small. Due to various bar code-printing technologies, this gap can grow larger than the maximum size allowed, preventing the digital scanner from decoding the symbol.
Page 344: Macro Pdf Features
13 - 80 DS3578 With FIPS Digital Scanner Product Reference Guide Macro PDF Features Macro PDF is a special feature for concatenating multiple PDF symbols into one file. The digital scanner can decode symbols that are encoded with this feature, and can store more than 64 Kb of decoded data stored in up to 50 MacroPDF symbols.
Page 345: Chapter 14 Advanced Data Formatting
Chapter 14 Advanced Data Formatting Introduction Advanced Data Formatting (ADF) is a means of customizing data before transmission to the host device. Use ADF to edit scan data to suit requirements. Implement ADF by scanning a related series of bar codes which program the digital scanner with ADF rules.
Page 346 14 - 2 DS3578 With FIPS Digital Scanner Product Reference Guide...
Page 347: Appendix A Standard Default Parameters
Appendix A Standard Default Parameters Standard Default Parameters Table Table A-1 Parameter Page Parameter Default Number Number Radio Communications Bluetooth Host (Host Type) Cradle Host Bluetooth Friendly Name Scanner name and serial number Discoverable Mode General Country Keyboard Types (Country Code) North American HID Keyboard Keystroke Delay No Delay (0 msec)
Page 348 A - 2 DS3578 With FIPS Digital Scanner Product Reference Guide Standard Default Parameters Table (Continued) Table A-1 Parameter Page Parameter Default Number Number Parameter Broadcast (Cradle Host Only) Enable 4-19 Pairing Modes Unlocked 4-20 Pairing on Contacts Disable 4-21...
Page 349 Standard Default Parameters A - 3 Standard Default Parameters Table (Continued) Table A-1 Parameter Page Parameter Default Number Number Unique Bar Code Reporting F1h D3h Disable 5-21 Decode Session Timeout 9.9 Sec 5-22 Timeout Between Decodes, Same Symbol 0.5 Sec 5-22 Fuzzy 1D Processing F1h 02h...
Page 350 A - 4 DS3578 With FIPS Digital Scanner Product Reference Guide Standard Default Parameters Table (Continued) Table A-1 Parameter Page Parameter Default Number Number Snapshot Aiming Pattern F0h 2Ch Enable Image Cropping F0h 2Dh Disable Crop to Pixel Addresses F4h F0h 3Bh;...
Page 351 Standard Default Parameters A - 5 Standard Default Parameters Table (Continued) Table A-1 Parameter Page Parameter Default Number Number Caps Lock On Disable Caps Lock Override Disable Convert Wedge Data Do Not Convert Wedge Data 7-10 Function Key Mapping Disable 7-10 FN1 Substitution Disable...
Page 352 A - 6 DS3578 With FIPS Digital Scanner Product Reference Guide Standard Default Parameters Table (Continued) Table A-1 Parameter Page Parameter Default Number Number USB Ignore Unknown Characters Enable 9-10 Emulate Keypad Disable 9-11 Emulate Keypad with Leading Zero Disable...
Page 353 Standard Default Parameters A - 7 Standard Default Parameters Table (Continued) Table A-1 Parameter Page Parameter Default Number Number OCR Security Level F1h 2Ah 12-12 OCR Subset F1h AEh Selected font variant 12-13 OCR Quiet Zone F1h B7h 12-13 OCR Bright Illumination F1h BDh Disable 12-14...
Page 354 A - 8 DS3578 With FIPS Digital Scanner Product Reference Guide Standard Default Parameters Table (Continued) Table A-1 Parameter Page Parameter Default Number Number Convert UPC-E1 to A Disable 13-20 EAN-8/JAN-8 Extend Disable 13-21 Bookland ISBN Format F1h 40h ISBN-10...
Page 355 Standard Default Parameters A - 9 Standard Default Parameters Table (Continued) Table A-1 Parameter Page Parameter Default Number Number Code 11 Code 11 Disable 13-38 Set Lengths for Code 11 1Ch, 1Dh 4 to 55 13-38 Code 11 Check Digit Verification Disable 13-40 Transmit Code 11 Check Digits...
Page 356 A - 10 DS3578 With FIPS Digital Scanner Product Reference Guide Standard Default Parameters Table (Continued) Table A-1 Parameter Page Parameter Default Number Number Matrix 2 of 5 Matrix 2 of 5 F1h 6Ah Disable 13-54 Matrix 2 of 5 Lengths...
Page 357 Standard Default Parameters A - 11 Standard Default Parameters Table (Continued) Table A-1 Parameter Page Parameter Default Number Number Composite Composite CC-C F0h 55h Disable 13-67 Composite CC-A/B F0h 56h Disable 13-67 Composite TLC-39 F0h 73h Disable 13-68 UPC Composite Mode F0h 58h Never Linked 13-68...
Page 358 A - 12 DS3578 With FIPS Digital Scanner Product Reference Guide Standard Default Parameters Table (Continued) Table A-1 Parameter Page Parameter Default Number Number Macro PDF Flush Macro PDF Buffer None 13-80 Abort Macro PDF Entry None 13-80 User selection is required to configure this interface and this is the most common selection.
Page 359: Appendix B Programming Reference
Appendix B Programming Reference Symbol Code Identifiers Symbol Code Characters Table B-1 Code Character Code Type UPC/EAN Code 39, Code 39 Full ASCII, Code 32 Codabar Code 128, ISBT 128, ISBT 128 Concatenated Code 93 Interleaved 2 of 5 Discrete 2 of 5, or Discrete 2 of 5 IATA Code 11 GS1-128 Bookland EAN...
Page 360 B - 2 DS3578 With FIPS Digital Scanner Product Reference Guide Symbol Code Characters (Continued) Table B-1 Code Character Code Type Aztec, Aztec Rune Data Matrix QR Code, MicroQR Maxicode US Postnet US Planet Japan Postal UK Postal Netherlands KIX Code...
Page 361: Aim Code Identifiers
Programming Reference B - 3 AIM Code Identifiers Each AIM Code Identifier contains the three-character string ]cm where: Flag Character (ASCII 93) Code Character (see Table B-2) Modifier Character (see Table B-3) Aim Code Characters Table B-2 Code Character Code Type Code 39, Code 39 Full ASCII, Code 32 Code 128, ISBT 128, ISBT 128 Concatenated, GS1-128, Coupon (Code 128 portion)
Page 362 B - 4 DS3578 With FIPS Digital Scanner Product Reference Guide The modifier character is the sum of the applicable option values based on Table B-3. Modifier Characters Table B-3 Code Type Option Value Option Code 39 No check character or Full ASCII processing.
Page 363 Programming Reference B - 5 Modifier Characters (Continued) Table B-3 Code Type Option Value Option Check digits are sent. No check digit is sent. Example: An MSI bar code 4123, with a single check digit checked, is transmitted as ]M14123. D 2 of 5 No options specified at this time.
Page 364 B - 6 DS3578 With FIPS Digital Scanner Product Reference Guide Modifier Characters (Continued) Table B-3 Code Type Option Value Option EAN.UCC Native mode transmission. Note: UPC portion of composite is transmitted using UPC rules. Composites (GS1 DataBar, Standard data packet.
Page 365 Programming Reference B - 7 Modifier Characters (Continued) Table B-3 Code Type Option Value Option Data Matrix ECC 000-140, not supported. ECC 200. ECC 200, FNC1 in first or fifth position. ECC 200, FNC1 in second or sixth position. ECC 200, ECI protocol implemented. ECC 200, FNC1 in first or fifth position, ECI protocol implemented.
Page 366 B - 8 DS3578 With FIPS Digital Scanner Product Reference Guide...
Page 367: Appendix C Sample Bar Codes
Appendix C Sample Bar Codes UPC-A 12345 67890 UPC-E 123456...
Page 368: Upc-E1
C - 2 DS3578 With FIPS Digital Scanner Product Reference Guide UPC-E1 123456 EAN-13 3 456789 012340 EAN-8 1234 5670 Code 39 123ABC...
Page 369: Trioptic Code 39
Sample Bar Codes C - 3 Trioptic Code 39 456123 Code 93 12345ABCDE Code 11 Æ1234567890Æ...
Page 370: Code 128
C - 4 DS3578 With FIPS Digital Scanner Product Reference Guide Code 128 1 2 3 4 5 6 7 8 9 0 Codabar A1234567890A 123456789 Interleaved 2 of 5 12345678912345...
Page 371: Pdf417
Sample Bar Codes C - 5 PDF417 Data Matrix Maxicode...
Page 372: Qr Code
C - 6 DS3578 With FIPS Digital Scanner Product Reference Guide QR Code US Postnet UK Postal...
Page 373: Appendix D Alphanumeric Bar Codes
Appendix D Alphanumeric Bar Codes Alphanumeric Keyboard Space...
Page 374 D - 2 DS3578 With FIPS Digital Scanner Product Reference Guide Alphanumeric Keyboard (continued)
Page 375 Alphanumeric Bar Codes D - 3 Alphanumeric Keyboard (continued) “ & ‘...
Page 376 D - 4 DS3578 With FIPS Digital Scanner Product Reference Guide Alphanumeric Keyboard (continued) < >...
Page 377 Alphanumeric Bar Codes D - 5 Alphanumeric Keyboard (continued)
Page 378 D - 6 DS3578 With FIPS Digital Scanner Product Reference Guide Alphanumeric Keyboard (continued) NOTE Do not confuse the bar codes that follow with those on the numeric keypad.
Page 379 Alphanumeric Bar Codes D - 7 Alphanumeric Keyboard (continued) End of Message Cancel...
Page 380 D - 8 DS3578 With FIPS Digital Scanner Product Reference Guide Alphanumeric Keyboard (continued)
Page 381 Alphanumeric Bar Codes D - 9 Alphanumeric Keyboard (continued)
Page 382 D - 10 DS3578 With FIPS Digital Scanner Product Reference Guide Alphanumeric Keyboard (continued)
Page 383 Alphanumeric Bar Codes D - 11 Alphanumeric Keyboard (continued)
Page 384 D - 12 DS3578 With FIPS Digital Scanner Product Reference Guide Alphanumeric Keyboard (continued)
Page 385 Alphanumeric Bar Codes D - 13 Alphanumeric Keyboard (continued)
Page 386 D - 14 DS3578 With FIPS Digital Scanner Product Reference Guide Alphanumeric Keyboard (continued)
Page 387 Alphanumeric Bar Codes D - 15 Alphanumeric Keyboard (continued)
Page 388 D - 16 DS3578 With FIPS Digital Scanner Product Reference Guide Alphanumeric Keyboard (continued)
Page 389 Alphanumeric Bar Codes D - 17 Alphanumeric Keyboard (continued)
Page 390 D - 18 DS3578 With FIPS Digital Scanner Product Reference Guide...
Page 391: Appendix E: Numeric Bar Codes
Appendix E Numeric Bar Codes Numeric Bar Codes For parameters requiring specific numeric values, scan the appropriately numbered bar code(s).
Page 392 E - 2 DS3578 With FIPS Digital Scanner Product Reference Guide Numeric Bar Codes (continued) For parameters requiring specific numeric values, scan the appropriately numbered bar code(s).
Page 393: Cancel
Numeric Bar Codes E - 3 Numeric Bar Codes (continued) For parameters requiring specific numeric values, scan the appropriately numbered bar code(s). Cancel In case of an error or to change the selection, scan the bar code below. Cancel...
Page 394 E - 4 DS3578 With FIPS Digital Scanner Product Reference Guide...
Page 395: Appendix F Ascii Character Sets
Appendix F ASCII Character Sets ASCII Value Standard Default Parameters Table Table F-1 Full ASCII ASCII Value Keystroke Code 39 Encode Character 1000 CTRL 2 1001 CTRL A 1002 CTRL B 1003 CTRL C 1004 CTRL D 1005 CTRL E 1006 CTRL F 1007...
Page 396 F - 2 DS3578 With FIPS Digital Scanner Product Reference Guide ASCII Value Standard Default Parameters Table (Continued) Table F-1 Full ASCII ASCII Value Keystroke Code 39 Encode Character 1016 CTRL P 1017 CTRL Q 1018 CTRL R 1019 CTRL S...
Page 397 ASCII Character Sets F - 3 ASCII Value Standard Default Parameters Table (Continued) Table F-1 Full ASCII ASCII Value Keystroke Code 39 Encode Character 1044 1045 1046 1047 1048 1049 1050 1051 1052 1053 1054 1055 1056 1057 1058 1059 1060 <...
Page 398 F - 4 DS3578 With FIPS Digital Scanner Product Reference Guide ASCII Value Standard Default Parameters Table (Continued) Table F-1 Full ASCII ASCII Value Keystroke Code 39 Encode Character 1072 1073 1074 1075 1076 1077 1078 1079 1080 1081 1082...
Page 399 ASCII Character Sets F - 5 ASCII Value Standard Default Parameters Table (Continued) Table F-1 Full ASCII ASCII Value Keystroke Code 39 Encode Character 1100 1101 1102 1103 1104 1105 1106 1107 1108 1109 1110 1111 1112 1113 1114 1115 1116 1117 1118...
Page 400 F - 6 DS3578 With FIPS Digital Scanner Product Reference Guide ALT Key Standard Default Tables Table F-2 ALT Keys Keystroke 2064 ALT 2 2065 ALT A 2066 ALT B 2067 ALT C 2068 ALT D 2069 ALT E 2070...
Page 401 ASCII Character Sets F - 7 Misc. Key Standard Default Table Table F-3 Misc. Key Keystroke 3001 PA 1 3002 PA 2 3003 CMD 1 3004 CMD 2 3005 CMD 3 3006 CMD 4 3007 CMD 5 3008 CMD 6 3009 CMD 7 3010...
Page 402 F - 8 DS3578 With FIPS Digital Scanner Product Reference Guide GUI Shift Keys (Continued) Table F-4 Other Value Keystroke 3057 GUI 9 3065 GUI A 3066 GUI B 3067 GUI C 3068 GUI D 3069 GUI E 3070 GUI F...
Page 403 ASCII Character Sets F - 9 PF Key Standard Default Table Table F-5 PF Keys Keystroke 4001 PF 1 4002 PF 2 4003 PF 3 4004 PF 4 4005 PF 5 4006 PF 6 4007 PF 7 4008 PF 8 4009 PF 9 4010...
Page 404 F - 10 DS3578 With FIPS Digital Scanner Product Reference Guide F key Standard Default Table (Continued) Table F-6 F Keys Keystroke 5010 F 10 5011 F 11 5012 F 12 5013 F 13 5014 F 14 5015 F 15...
Page 405 ASCII Character Sets F - 11 Numeric Key Standard Default Table (Continued) Table F-7 Numeric Keypad Keystroke 6053 6054 6055 6056 6057 6058 Enter 6059 Num Lock Extended Keypad Standard Default Table Table F-8 Extended Keypad Keystroke 7001 Break 7002 Delete 7003 Pg Up...
Page 406 F - 12 DS3578 With FIPS Digital Scanner Product Reference Guide...
Page 407: Appendix G Signature Capture Code
Appendix G Signature Capture Code Introduction CapCode, a signature capture code, is a special pattern that encloses a signature area on a document and allows a digital scanner to capture a signature. There are several accepted patterns that allow automatic identification of different signatures on the same form. For example, on the federal tax return 1040 form there are three signature areas, one each for two joint filers, and one for a professional preparer.
Page 408: Capcode Pattern Structure
G - 2 DS3578 With FIPS Digital Scanner Product Reference Guide CapCode Pattern Structure A CapCode pattern structure consists of a start pattern followed by a separator space, a signature capture box, a second separator space, and then a stop pattern. Assuming that X is the dimension of the thinnest element, the start and stop patterns each contains 9X total width in 4 bars and 3 spaces.
Page 409: Dimensions
Signature Capture Code G - 3 Table G-2 lists selectable parameters used to generate the image of the captured signature. User Defined CapCode Parameters Table G-2 Parameter Defined Width Number of pixels Height Number of pixels Format JPEG, BMP, TIFF JPEG quality 1 (most compression) to 100 (best quality) Bits Per Pixel...
Page 410: Additional Capabilities
G - 4 DS3578 With FIPS Digital Scanner Product Reference Guide Additional Capabilities Regardless of how the signature is captured, the output signature image is de-skewed and right-side up. A digital scanner that captures signatures automatically determines whether it is scanning a signature or a bar code.
Page 411: Glossary
Glossary Aperture. The opening in an optical system defined by a lens or baffle that establishes the field of view. ASCII. American Standard Code for Information Interchange. A 7 bit-plus-parity code representing 128 letters, numerals, punctuation marks and control characters. It is a standard data transmission code in the U.S. Autodiscrimination.
Page 412 Glossary - 2 DS3578 With FIPS Digital Scanner Product Reference Guide Boot or Boot-up. The process a computer goes through when it starts. During boot-up, the computer can run self-diagnostic tests and configure hardware and software. bps. See Bits Per Second.
Page 413 Glossary - 3 Continuous Code. A bar code or symbol in which all spaces within the symbol are parts of characters. There are no intercharacter gaps in a continuous code. The absence of gaps allows for greater information density. Cradle. A cradle is used for charging the terminal battery and for communicating with a host computer, and provides a storage place for the terminal when not in use.
Page 414 Glossary - 4 DS3578 With FIPS Digital Scanner Product Reference Guide Hz. Hertz; A unit of frequency equal to one cycle per second. IEC. International Electrotechnical Commission. This international agency regulates laser safety by specifying various laser operation classes based on power output during operation.
Page 415 Glossary - 5 Light Emitting Diode. See LED. MIL. 1 mil = 1 thousandth of an inch. MIN. Mobile Identification Number. The unique account number associated with a cellular device. It is broadcast by the cellular device when accessing the cellular system. Misread (Misdecode).
Page 416 Glossary - 6 DS3578 With FIPS Digital Scanner Product Reference Guide Print Contrast Signal (PCS). Measurement of the contrast (brightness difference) between the bars and spaces of a symbol. A minimum PCS value is needed for a bar code symbol to be scannable. PCS = (RL - RD) / RL, where RL is the reflectance factor of the background and RD the reflectance factor of the dark bars.
Page 417 Glossary - 7 SPP. Serial Port Profile. Start/Stop Character. A pattern of bars and spaces that provides the scanner with start and stop reading instructions and scanning direction. The start and stop characters are normally to the left and right margins of a horizontal code. Substrate.
Page 418 Glossary - 8 DS3578 With FIPS Digital Scanner Product Reference Guide...
Page 419 Index Numerics 123Scan2 ....... . 11-1 bar codes 2D bar codes Australian postal .
Page 420 Index - 2 DS3578 With FIPS Digital Scanner Product Reference Guide composite CC-A/B ..... 13-67 image file format ....6-14, 6-18 composite CC-C .
Page 421 Index - 3 check digit validation ....12-26 scan data options ..... . . 5-43 default table .
Page 422 Index - 4 DS3578 With FIPS Digital Scanner Product Reference Guide quick emulation ..... . 9-12 check digit verification ....13-34 simulated caps lock .
Page 423 ......6-14, 6-18 Motorola Solutions support ....xviii image brightness (target white) .
Page 424 Index - 6 DS3578 With FIPS Digital Scanner Product Reference Guide check digits ......13-52 power .
Page 425 Index - 7 supplying power ......1-7 unpacking ......1-2 signal descriptions .
Page 426 Index - 8 DS3578 With FIPS Digital Scanner Product Reference Guide...
Page 427: Tell Us What You Think
We’d like to know what you think about this Manual. Please take a moment to fill out this questionnaire and fax this form to: (631) 627-7184, or mail to: Motorola Solutions, Inc. One Motorola Plaza M/S B-10 Holtsville, NY 11742-1300 Attention: Technical Publications Manager Advanced Data Capture Division IMPORTANT: If you need product support, please call the appropriate customer support number provided.
Page 430 Holtsville, New York 11742, USA 1-800-927-9626 http://www.motorolasolutions.com MOTOROLA, MOTO, MOTOROLA SOLUTIONS and the Stylized M Logo are trademarks or registered trademarks of Motorola Trademark Holding, LLC and are used under license. All other trademarks are the property of their respective owners.

Motorola DS3578 Product Reference Manual

About this Guide

Chapter 1 Getting Started

Chapter 2 Scanning

Chapter 3 Maintenance and Technical Specifications

Chapter 4 Radio Communications

Chapter 5 User Preferences

Chapter 6 Imaging Preferences

Chapter 7 Keyboard Wedge Interface

Chapter 8 RS-232 Interface

Chapter 9 USB Interface

Chapter 10 IBM 468X/469X Interface

Chapter 11 123Scan2

Chapter 12 OCR Programming

Chapter 13 Symbologies

Quick Links

Troubleshooting

Related Manuals for Motorola DS3578

Summary of Contents for Motorola DS3578