Chapter 5: Decoding Preferences; Introduction; Decoding Preferences - Motorola Symbol DS3408 Product Reference Manual

Chapter 5 Decoding Preferences

Introduction

You can program the digital scanner to perform various functions, or activate different features. This chapter
describes digital scanner preference features and provides programming bar codes for selecting these features.
The digital scanner ships with the settings shown in the
Appendix A, Standard Default Parameters
requirements, programming is not necessary.
To set feature values, scan a single bar code or a short bar code sequence. The settings are stored in non-volatile
memory and are preserved even when you power down the digital scanner.
NOTE Most computer monitors allow scanning the bar codes directly on the screen. When scanning from the
screen, be sure to set the document magnification to a level where you can see the bar code clearly, and
bars and/or spaces are not merging.
If not using a Synapse or USB cable, select a host type (see each host chapter for specific host information) after
the power-up beeps sound. This is only necessary upon the first power-up when connected to a new host.
To return all features to default values, scan the
bar code menus, asterisks (
*
Indicates Default
Scanning Sequence Examples
In most cases scanning one bar code sets the parameter value. For example, to disable the decode aiming pattern,
scan the Disable Decode Aiming Pattern bar code under
scanner issues a fast warble beep and the LED turns green, signifying a successful parameter entry.
Other parameters require scanning several bar codes. See these parameter descriptions for this procedure.
for all host device and miscellaneous defaults). If the default values suit
Set Default Parameter on page
*
) indicate default values.
*Enable Decode Aiming Pattern
(02h)
Decoding Preferences Default Table on page 5-2
4-3. Throughout the programming
Feature/Option
Hex Value
Decode Aiming Pattern on page
(also see
5-4. The digital