Table of Contents
Advertisement
Host RTS Line State
Parameter # 9Ah
This parameter sets the expected idle state of the Serial Host RTS line.
The SSI Interface is used with host applications which also implement the SSI protocol. However, the digital scanner can be used in
a "scan-and-transmit" mode to communicate with any standard serial communication software on a host PC (see
Format on page
6-9). If transmission errors occur in this mode, the host PC may be asserting hardware handshaking lines which
interfere with the SSI protocol. Scan the Host: RTS High bar code to address this problem.
*
Host: RTS Low
Decode Data Packet Format
Parameter # EEh
This parameter selects whether to transmit decoded data in raw format (unpacketed), or with the packet format defined by the serial
protocol.
Selecting the raw format disables ACK/NAK handshaking for decode data.
*
Send Raw Decode Data
(00h)
(00h)
Decode Data Packet
Host: RTS High
(01h)
Send Packeted Decode Data
(01h)
SSI Interface 6-9
Advertisement
Table of Contents
