Removing And Replacing The Supervisory Board - HP R12000 XR Maintenance And Service Manual

Removal and Replacement Procedures

Removing and Replacing the Supervisory Board

To remove the supervisory board:
1. Remove the control bezel and the supervisory bezel. For more information, refer to the
sections, "Removing and Replacing the Control Bezel" and "Removing and Replacing
the Supervisory Bezel," in this chapter.
2. Pull the supervisory board out of the chassis.
Figure 4-11: Removing the supervisory board
3. To replace the supervisory board, reverse the preceding steps.
4-14
HP CONFIDENTIAL Codename: Sierra Part Number: 221273-001 Last Saved On: 8/7/02 3:45 PM
HP UPS R12000 XR Models Maintenance and Service Guide