Displaying The Status Or Active Alarms - HP R12000 XR Maintenance And Service Manual

Displaying the Status or Active Alarms

The first option on the Main Menu is Status. Select this option and press the Enter button to
display the status or active alarms for either the main module (MM) or electronics modules
(M1-M4).
Main Module (MM) Status and Alarms
Select Main Module MM to display Status and Alarms for the main module. Table 3-3 lists
the possible status options. For a descriptive list of alarm causes and solutions, refer to the
section, "LCD Alarm Troubleshooting," in Chapter 5.
NOTE: A display of x Alarms means that one or more alarms are present. The variable x indicates the
number of alarms.
Table 3-3: Main Module Status Options
HP UPS R12000 XR Models Maintenance and Service Guide
HP CONFIDENTIAL Codename: Sierra Part Number: 221273-001 Last Saved On: 7/31/02 8:58 AM
Main Menu
Status
Status: Select
Main Module MM
LCD Display Explanation
Load Power Off
System Normal
0 Alarms
Load Power On
x Alarms
On Battery
x Alarms
On Bypass
x Alarms
Manual Bypass
x Alarms
Overload
x Alarms
Autocalibrating
x Alarms
The UPS is in Standby mode and is not supporting the load.
The UPS is operating normally from utility and is protecting the load.
No alarms are present.
The UPS is operating from utility and is protecting the load.
The UPS is operating from battery and is protecting the load.
The UPS is operating from Automatic Bypass mode and is not
protecting the load.
The UPS is operating from Manual Bypass mode and is not
protecting the load.
The UPS is protecting the load. The current load level is exceeding
the maximum operational range for the UPS.
The UPS is operating from utility and is protecting the load while it is
performing the module-sharing calibration process.
Identifying Components
continued
3-13