List Of Functions; Configuration Menu Table - Epson EB-W16SK User Manual

List of Functions

Configuration Menu Table

Apply the set items or values to the commander and the receiver.
Settable items vary depending on the model being used and the image
signal and source being projected.
Top Menu Name Submenu Name
Image menu Color Mode
p.58
s
Auto Iris
Signal menu Auto Setup
p.58
s
Resolution
3D Setup
Progressive
Noise Reduction
HDMI Video Range
Input Signal
Video Signal
Aspect
Overscan
Settings menu Adjust Commander
Pos.
p.60
s
Control Panel Lock
Power Consumption
Items or Setting Values
Dynamic, Presentation, Theatre,
Photo, Sports, sRGB, Blackboard,
Whiteboard, 3D Presentation,
and 3D Theatre
On and Off
On and Off
Auto, Wide, and Normal
3D Display, 3D Format, Inverse
3D Image, and 3D Viewing
Notice
Off, Video, and Film/Auto
Off, NR1, and NR2
Auto, Normal, and Expanded
Auto, RGB, and Component
Auto, NTSC, NTSC4.43, PAL,
M-PAL, N-PAL, PAL60, and
SECAM
Normal, Auto, 16:9, Full, Zoom,
and Native
Auto, Off, 4%, and 8%
Pattern Color (Commander),
Pattern Color (Receiver), and
Start Adjustments
Full Lock, Partial Lock, and Off
Normal and ECO
Top Menu Name Submenu Name
Volume
Remote Receiver
User Button
Extended menu Display
p.61
s
Projection
Operation
Language
Info menu Lamp Hours
p.62
s
Source
Input Signal
Resolution
Video Signal
Refresh Rate
3D Format
Sync Info
Status
Serial Number
Reset menu Reset Lamp Hours
p.63
s
* The number of supported languages differs depending on the region where the
projectors are used.
57
Items or Setting Values
0 to 10
Front/Rear, Front, Rear, and Off
Power Consumption, Info,
Progressive, and Resolution
Messages, Display Background,
Startup Screen, and A/V Mute
Front, Front/Ceiling, Rear, and
Rear/Ceiling
Direct Power On, Sleep Mode,
Sleep Mode Timer, Lens Cover
Timer, High Altitude Mode,
Monitor Out Port, and Stack
Mode
15 or 35 languages
*1
-
-
-
-
-
-
-
-
-
-
Reset Lamp Hours
(Commander) and Reset Lamp
Hours (Receiver)