Adjusting Projected Images; Superimposing Two Images; Adjusting The Image Size; Adjusting The Image Position - Epson EB-W16SK User Manual

Hide thumbs Also See for EB-W16SK:
Table of Contents

Advertisement

Adjusting Projected Images

Superimposing Two Images

If the images shift out of sync during projection, press the [Screen Fit]
button on the commander or the remote control. The adjustment screen is
displayed and the images are superimposed correctly after a few seconds.
a
See the following manual for more information on superimposing two
images after installation.
Startup Guide
s

Adjusting the Image Size

You can adjust the size of the image by using the zoom rings on the
commander and the receiver. See the following manual for more
information on matching the size for two images.
Startup Guide
s
W
T

Adjusting the Image Position

Extend or retract the front adjustable foot for the stacker mount. You can
adjust the position of the image by tilting the projector up to 6 degrees.
a
The larger the angle of tilt, the harder it becomes to focus. Install the
projector so that it only needs to be tilted at a small angle.

Adjusting the Horizontal Tilt

Extend and retract the rear feet for the stacker mount to adjust the
horizontal tilt.
36

Advertisement

Table of Contents
loading

Table of Contents