Connecting Equipment; Connecting The Commander And The Receiver - Epson EB-W16SK User Manual

Connecting Equipment

The port name, location, and connector orientation differ depending on the source being connected.

Connecting the Commander and the Receiver

To allow the commander to control receiver operations, you need to connect the commander and the receiver with a USB cable.
Connect the commander's USB(TypeA) port to the receiver's USB(TypeB) port with a USB cable.
a
In a configuration such as the illustration below, the projector on top is the commander, and the projector on the bottom is the receiver. When suspended from a
ceiling, the projector on top is the receiver, and the projector on the bottom is the commander.
USB TypeA
USB TypeB
21