Security Functions; Managing Users (Password Protect); Kinds Of Password Protect; Setting Password Protect - Epson EB-W16SK User Manual

Security Functions

The projector has the following enhanced security functions.
Password Protect
You can limit who can use the projector.
Control Panel Lock
You can prevent people changing the settings on the projector without
permission.
"Restricting Operation (Control Panel Lock)"
s
Anti-Theft Lock
The projector is equipped with the following anti-theft security device.
"Anti-Theft Lock" p.52
s

Managing Users (Password Protect)

When Password Protect is activated, people who do not know the password
cannot use the projector to project images even if the projector power is on.
Furthermore, the user's logo that is displayed when you turn on the
projector cannot be changed. This acts as an anti-theft function as the
projector cannot be used even if it is stolen. At the time of purchase,
Password Protect is not activated.

Kinds of Password Protect

The following three kinds of Password Protect settings can be made
according to how the projector is being used.
Power On Protect
When Power On Protect is On, you need to enter a preset password after
the projector is plugged in and turned on (this also applies to Direct
Power On). If the correct password is not entered, projection does not
start.
User's Logo Protect
Even if someone tries to change the User's Logo set by the owner of the
projector, it cannot be changed. When User's Logo Protect is set to On,
the following setting changes for the User's Logo are prohibited.
p.50

Setting Password Protect

Use the following procedure to set Password Protect.
a
Capturing a User's Logo
Setting Display Background, Startup Screen, or A/V Mute from
Display
Extended - Display p.61
s
When password protect is set, use one of the following methods to
turn on the projector.
Set Stack Mode to Off, and then turn on the commander or the
receiver.
s "Clearing the Stacked Configuration and Using One Projector"
p.91
When Stack Mode is set to On, and then turn on one of the
projectors (the commander or the receiver).
For the commander: Hold down the [1] button on the remote
control and then press the [t] button.
For the receiver: Hold down the [2] button on the remote control
and then press the [t] button.
s "Turning On One Projector in a Stacked Configuration"
p.91
While projecting in a stacked configuration, the password set for the
commander is enabled.
48