SECTION 5—COMPRESSOR OPERATION
Disconnecting the Cylinder from the Compressor
NOTE: For this procedure, refer to FIGURE 5.3.
1. Press the compressor power switch to the Off (O) position.
2. Grasp the cylinder in the area behind the cylinder fillport.
3. With the other hand, grasp the outer ring (sleeve) of the
connector fillport and push DOWN.
4. Lift up on the cylinder to remove from the connector fillport.
Cylinder
Compressor
Connector
Fillport
FIGURE 5.3 Disconnecting the Cylinder from the Compressor
5. When the cylinder fillport is disconnected from the connector
fillport, release the outer ring (sleeve) of the connector fillport
and use two hands to remove the cylinder from the
compressor cradle.
HomeFill
Compressor
®
Cylinder
Fillport
26
PUSH DOWN
Outer Ring
(Sleeve)
Part No 1100873