Connecting The Compressor To The Concentrator - Invacare Compressor User Manual

SECTION 3—INITIAL SETUP
Wall
Outlet
Power
Cord
NOTE: This product may come with a polarized plug (one blade is
wider than the other). As a safety feature, this plug will fit in a
polarized outlet only one way. If the plug does not fit fully in the
outlet, reverse the plug. If it still does not fit, contact a qualified
electrician. DO NOT attempt to defeat this safety feature.
FIGURE 3.2 Installing the Power Cord

Connecting the Compressor to the Concentrator

NOTE: For this procedure, refer to FIGURE 3.3 on page 19.
1. Insert one end of the interconnect hose into the outlet fitting
on the back of the concentrator (Detail "A").
2. Insert the opposite end of the interconnect hose into the inlet
fitting on the side of the compressor (Detail "B").
NOTE: The metal tabs on the concentrator outlet fitting and the
compressor inlet fitting will pop out with an audible "click" when the
end of the interconnect hose is properly installed (Detail "C").
HomeFill Compressor
®
Compressor
(REAR)
Electrical
Connection
18 Part No 1100873