Automatic Redial; Receiving A Fax; Reception Modes - Samsung SF-330 User Manual

Automatic redial

When you send a fax, if the number you have dialled is busy or there is no answer, the machine will attempt to
redial the number every three minutes up to two times.
Before redialling, the display shows
If you want to redial the number immediately, press
Or, press to cancel redialling and then the machine returns to Standby Mode.
Stop/Cancel

Receiving a fax

Before you receive a fax, be sure to load one of the supported paper sizes for receiving faxes. For information on
what paper types you can use, see "Paper type and sizes" on page 1.5.

Reception modes

Your fax machine has various reception modes; FAX, TEL, AUTO, TAM and DRPD. For DRPD Mode, see
"DRPD Mode" on page 6.7. first. If you are an SF-335T user, you have to press the
mode. Do not press the
Rcv.Mode/Contrast
when no document is loaded. The following chart describes how each reception mode works:
Rcv.Mode/Contrast
Reception
Your model
mode
FAX All
TEL
AUTO
TAM SF-335T
SF-330/
SF-331P
If you rarely use the fax line for voice conversation, set the machine to receive faxes automatically by selecting
either FAX or AUTO Mode.
3.4
To redial now, press Start/Enter
button. You can change the reception mode by pressing
How it works
The machine answers an incoming call and immediately
goes into receive mode, expecting a fax to be received.
The automatic fax reception is turned off. You can receive a
fax only by manually pressing Start/Enter.
Your fax machine will answer faxes automatically after the
number of rings you specify. If the machine does not pick up
a fax signal, it will give another ringing tone to tell you it is a
phone call. You should lift the handset to answer the call. If
you do not pick up the handset on your fax machine, it will
switch to the automatic reception mode.
Your machine plays a greeting message to callers, and then
the caller can leave an incoming message on your machine
as well as a fax.
You have to have an answering machine attached to the EXT
line socket on your fax machine. When the phone rings, the
attached answering machine answers and stores the caller's
message if they leave one. If your machine senses a fax tone
on the line, the call automatically switches over to fax
receive mode.
.
Start/Enter
.
button to select TAM
Answer
Reference section
Receiving in FAX mode
on page 3.5.
Receiving in TEL mode
on page 3.5.
Receiving in AUTO mode
on page 3.5.
Receiving in TAM mode
(SF-335T) on page 3.6.
Receiving in TAM mode
(SF-330/SF-331P) on
page 3.5.