User Reports; To Print A Report - Samsung SF-330 User Manual

User reports

Your fax machine can print reports containing useful information - Scheduled Info, System Data, Help report,
etc.

To print a report

1
Press .
Report/Help
2
Choose the report you want by using < or >.
3
Press when the desired report is displayed.
Start/Enter
The selected report will be printed. The available reports are shown below:
Report name
Help List
This report covers the machine's basic functions and commands. It can also
be used as a quick reference guide.
Sent Journal
These reports show information concerning the transmission and reception
and Received
activities. They can be printed on command or if the machine is set to do so.
Journal
They will automatically print after every 40 transmissions or receptions.
Phonebook
This report shows all of the numbers currently stored in the fax machine's
memory as One-Touch Dial and Speed Dial.
Sending
This report shows the fax number, the number of pages, elapsed time of the
Confirm
operation, the communication mode, and the communication results. Set up
your machine as described in "Sending Confirm" on page 6.7. to
automatically print Sending Confirm.
Schedule Inform
This report shows the document currently stored for Delayed FAX and Send
Polling along with the operation number, starting time and type of operation,
etc.
System Data
This report shows the status of the User Options. After you have changed
any setting, print this report to check your changes.
Caller ID
This report shows the information of the most recent 30 callers who have
called your machine.
Junk Fax This report shows the 20 telephone numbers which was marked as a junk
fax.
a This report shows the status of the recorded messages. You can see when you
TAM Status
have received a message and if you've listened to it or not.
Print Fax
Your machine stores fax data into memory as far as the memory is available
and lets you print it at later time. For more information, see "Re-Printing
faxes" on page 6.5.
Multi-Communication This report prints automatically if you have faxed documents to more than
one location by using Broadcasting.
Power Fail Report If experience a power failure, this report is printed automatically when
power is restored, to notify you that there was a power failure. This report
prints only when there was any scheduled job such as Delayed FAX or Send
Poll, received job or TAM Message (SF-335T).
a. SF-335T only
6.4
Content How it prints
Manual
Manual/Automatic
Manual
Manual/Automatic
Manual
Manual
Manual
Manual
Manual
Manual
Automatic