Cancelling Transmission; Confirming Transmission; Automatic Redial - Samsung SF4500 User Manual

Cancelling Transmission

Press Stop any time during transmission.

Confirming Transmission

When the last page of your document has been sent successfully, the
machine beeps and returns to Standby Mode.
If something went wrong during your fax transmission, an error message
appears in the display. For a listing of error messages and their meanings,
see page 3.5.
If you receive an error message, press Stop to clear the message and try to
send the document again.
You can set your machine to print out a confirmation report automatically
each time sending is completed.
For more information, see `User OptionsÕ on 2.36.

Automatic Redial

When you send a fax, if the number you have dialled is busy or there is no
answer, the machine hangs up, waits for the specified retry term and redials
the number. If, after the specified number of retry attempts (retry count),
the machine fails to connect, the machine returns to Standby Mode.
While the machine is redialling, the display shows ÔRETRY REDIAL?Õ. If
you want to redial the number immediately, press Start. To stop redialling,
press Stop.
You can select the number of retries and the retry time between each redial
attempt. See ÔUser OptionsÕ on page 2.36.
2.12
Sending a Fax