Turning The Appliance On; Turning The Appliance Off; Menu Settings; Descale - DeLonghi ECAM23.210 Instructions For Use Manual

for there to be traces of coffee in the mill.
The machine is, however, guaranteed to be
new.
soon as possible following the instructions
in the section "Setting water hardness" on
page 17.
Follow the instructions:
1. Remove the water tank, fill to the MAX line
with fresh water (fig. 1A) then put back in the
appliance (fig. 1B).
2. Place a container with a minimum capacity
of 100 ml under the cappuccino maker (fig.
2).
3. Plug the appliance into the mains socket and
place the main switch on the back of the ap-
pliance in the I position (fig. 3).
4. The light flashes on the control panel
(fig. 4).
5. Turn the steam knob to the "I" position (fig.
5) and press the
6). The appliance delivers water from the
cappuccino maker then goes off.
6. Turn the steam knob to the "0" position.
The coffee maker is now ready for normal use.
Please note!
you need to make 4-5 cups of coffee or 4-5
cappuccinos before the appliance starts to
give satisfactory results.
To enjoy your coffee even more and improve
the performance of your appliance, we re-
commend installing a water softener filter as
FILTER".
If your model is not provided with a filter, you
can request one from De'Longhi Customer
Services.

TURNING THE APPLIANCE ON

Please note!
Before turning the appliance on, make sure the
main switch on the back of the appliance is in the
I position (fig. 3).
Each time the appliance is turned on, it performs
an automatic preheat and rinse cycle which can-
not be interrupted.
button to confirm (fig.
The appliance is ready for use only after comple-
tion of this cycle.
Danger of burns!
During rinsing, a little hot water comes out of
the coffee spouts and is collected in the drip tray
underneath.
Avoid contact with splashes of water.
button (fig. 7). The
the appliance is heating up and performing
an automatic rinse cycle. By circulating hot
water, the appliance heats both the boiler and
the internal circuits.
The appliance is at temperature when the
light goes off and the lights corresponding to the
selected coffee taste and quantity come on.

TURNING THE APPLIANCE OFF

Each time the appliance is turned off, it performs
an automatic rinse cycle which cannot be inter-
rupted.
Danger of burns!
During rinsing, a little hot water flows from the
coffee spouts. Avoid contact with splashes of
water.
To turn the appliance off, press the
(fig. 7). The appliance performs a rinse cycle,
then goes off.
Please note!
If the appliance is not used for an extended period,
place the main switch in the 0 position (fig. 3).
Important!
To avoid damaging the appliance, never place the
main switch (fig. 3) in the 0 position while the
appliance is on.

MENU SETTINGS

When you access the programming menu by pressing
the P button, the following menu settings are available:
Descale, Auto-off, Set temperature, Energy Saving, Wa-
ter hardness, Install filter, Replace filter, Default values,
Statistics.

Descale

For instructions on descaling, see page 16.
10
light flashes while
button