Explanation Of Lights - DeLonghi ECAM23.210 Instructions For Use Manual

Bean to cup espresso and cappuccino machine
Hide thumbs Also See for ECAM23.210:
Table of Contents

Advertisement

rity differentiated waste collection centre or to
a dealer providing this service. Disposing of a
household appliance separately avoids possible
negative consequences for the environment and
health deriving from inappropriate disposal and

EXPLANATION OF LIGHTS

LIGHT
enables the constituent materials to be recove-
red to obtain significant savings in energy and
resources.As a reminder of the need to dispose
of household appliances separately, the product
is marked with a crossed-out wheeled dustbin.
POSSIBLE CAUSE
Insufficient water in the tank.
The tank is not correctly in place.
The grounds container (A13)
is full.
After cleaning, the grounds
container has not been replaced.
The grinding is too fine and the
coffee is delivered too slowly or
not at all.
19
REMEDY
Fill the tank with water and insert it correctly,
pushing it as far as it will go until it clicks
into place.
Insert the tank correctly and press as far as
it will go.
Empty the grounds container and drip tray,
clean and replace.
Important: when removing the drip tray, the
grounds container MUST be emptied, even if
it contains few grounds.
If this is not done, when you make the next
coffees, the grounds container may fill up
more than expected and clog the machine.
Remove the drip tray and insert the grounds
container.
Repeat coffee delivery and turn the grinding
adjustment knob (fig. 10) one click clockwise
towards "7" while the coffee mill is in
operation.
If after making at least 2 coffees delivery is
still too slow, repeat the correction procedure,
turning the grinding adjustment knob another
click until delivery is correct (see the section:
Adjusting the coffee mill on page 29).
If the problem persists, turn the steam knob
to the I position and deliver water from the
cappuccino maker.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents