Replacing The Filter; Removing The Filter; Technical Specification; Disposal - DeLonghi ECAM23.210 Instructions For Use Manual

bubbles to escape (fig. 31).
5. Insert the filter in the filter housing (fig. 32A)
and press as far as it will go.
6. Close the tank with the lid (fig. 32B), then
replace the tank in the machine.
When you install the filter, you must notify the
appliance of its presence.
7. Press the P button to enter the menu;
8. Turn the selection knob until the
lights come on.
9. Press the OK button.
10. Press the button to confirm the selec-
tion.
11. Place a container (min. capacity: 100 ml) un-
der the cappuccino maker.
12. Turn the steam knob and press the
ton.
13. At the end of delivery, the
Close the knob and the appliance returns au-
tomatically to the "ready for coffee" state.
The new filter is active and you can now use the
coffee maker.
Replacing the filter
When the light flashes, after two months
(see date indicator) or when the appliance has
not been used for 3 weeks, you should replace
the filter:
1. Remove the exhausted filter;
2. Remove the new filter from the packaging.
3. Turn the date indicator disk (see fig. 30) until
the next 2 months of use are displayed (the
filter lasts about two months);
4. Refill the tank;
5. Insert the filter in the water tank and immer-
se it completely, sloping it to enable the air
bubbles to escape (fig. 31);
6. Place the filter in the filter housing (fig. 32A)
and press as far as it will go. Close the tank
with the lid (fig. 32B), then replace the tank
in the machine;
7. Place a container (min. capacity: 100 ml) un-
der the cappuccino maker.
8. Press the P button to enter the menu;
9. Turn the selection knob until the
lights come on.
10. Press the button. The OK light flashes.
11. Press the button to confirm the selec-
tion.
12. Turn the steam knob and press the
13. At the end of delivery, the
The new filter is now active and you can use the
coffee maker.
Removing the filter
and If you want to continue using the appliance wi-
thout a filter, you must remove it and notify the
appliance of its removal as follows:
1. Extract the tank and exhausted filter;
2. Press the P button to enter the menu;
3. Turn the selection knob (fig. 8) until the
4. Press the
but-
5. Press the
light flashes.
6. Press the

TECHNICAL SPECIFICATION

Voltage:
Absorbed power:
Pressure:
Water tank capacity:
Size LxHxD:
Cable length:
Weight:
Coffee beans container capacity: 150 g max.

DISPOSAL

and
waste. It must be taken to a special local autho-
18
button.
Close the knob and the appliance returns au-
tomatically to the "ready for coffee" state.
and lights come on;
button. The OK light flashes;
button to confirm use of the
appliance without the filter;
button to exit the menu.
220-240 V~ 50/60 Hz max. 10A
The appliance complies with the following
EC directives:
sequent amendments;
amendments
tact with food conform to EEC regulation
1935/2004.
Important information for correct dispo-
sal of the product in accordance with EC
Directive 2002/96/EC.
At the end of its working life, the pro-
duct must not be disposed of as urban
light flashes.
1450W
15 bars
1.8 L max.
238x340x430 mm
1.15 m
9.1 kg
-
-