Fibre Channel Small Form-Factor Pluggable (Sfp) Receptacle (J34 And J35); Fibre Channel Sfp Optical Transceiver Module; Fibre Channel Sfp Copper Transceiver Module (Amp, J34, J35) - Intel NetStructure MPCBL0001 Technical Product Specification

®
Intel NetStructure MPCBL0001 High Performance Single Board Computer
Contents
4.2.3 Fibre Channel Small Form-Factor Pluggable (SFP)
Receptacle (J34 and J35)
AMP part number:
The MPCBL0001 SBC has two SFP receptacles that support either the copper or fiber module
interface. Fibre Channel connector J34 and J35 are available at the front panel. See
"MPCBL0001 SBC Connector Locations" on page 80
"Fibre Channel SFP Pin Assignments" on page 91
Table 49.

Fibre Channel SFP Copper Transceiver Module (AMP, J34, J35)

USFibre Channel Connector (J34) Pin Assignments
Pin #
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
4.2.4

Fibre Channel SFP Optical Transceiver Module

Refer to the Intel NetStructure
transceivers that have been validated. The report can be downloaded from
http://www.intel.com/design/network/products/cbp/atca/mpcbl0001.htm
90
1367073-1
Fibre Channel CONNECTOR
Signal Name
Signal Ground
Transmitter Fault
Transmitter Disable Input
Module Definition 2
Module Definition 1
Module Definition 0
Rate Select (not implemented)
Loss of Signal
Signal Ground
Signal Ground
Signal Ground
Received Data Out Bar
Received Data Out
Signal Ground
Receiver Power Supply
Transmitter Power Supply
Signal Ground
Transmitter Data In
Transmitter Data In Bar
Signal Ground
®
MPCBL0001 Compatibility Report for a list of SFP optical
for its position on the board. See
for pinout information.
Fibre Channel SFP Receptacle (J34, J35)
Technical Product Specification
Figure 13,
Table 50,
Order #273817