Technical Product Specification
INT-A not supported for EQs only MSI-X
PCI VPD write flow (RO flow supported)
Streaming receive queue (STRQ) and collapsed CQ
Precise clock synchronization over the network (IEEE 1588)
Data integrity validation of control structures
NC-SI interface is not enabled in Connect-IB* firmware
PCIe Function Level Reset (FLR)
5.9.2 Quad Small Form-factor Pluggable (QSFP+) Connector
Port of the Mellanox* ConnectX-IB* is connected to a single QSFP+ connector on Intel
Board S2600KPR (available on SKU: S2600KPFR).
The QSFP+ module and all pins shall withstand 500V electrostatic discharge based on the
Human Body Model per JEDEC JESD22-A114-B.
The module shall meet ESD requirements given in EN61000-4-2, criterion B test specification
such that when installed in a properly grounded cage and chassis the units are subjected to
12KV air discharges during operation and 8KV direct contact discharges to the case.
Revision 1.37
®
Server
65